Skip to content
Peptigraph home

1 mg to units

Units and mL measure volume, mg and mcg measure amount, so the conversion depends on how concentrated the vial is. The answer below states the vial and water it assumes; change them in the converter.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureUpdated Educational use only
1 mg =
20units
on a U-100 syringe at 5 mg/mL (10 mg + 2 mL water)Shown on a 0.3 mL (30-unit) U-100 syringe: 20 units = 0.2 mL.

The working

10 mg ÷ 2 mL = 5 mg/mL1 mg ÷ 5 mg/mL = 0.2 mL0.2 mL × 100 = 20 units

This uses 10 mg + 2 mL of bacteriostatic water as an example. Your vial label and the water you added decide the real answer.

Math only. It does not recommend a dose.

Convert another amount (mg to units)

mg
mg
mL
Syringe scale
Result
20units
10 mg ÷ 2 mL = 5 mg/mL1 mg ÷ 5 mg/mL = 0.2 mL0.2 mL × 100 = 20 units

mg to units: nearby values

Each column is a different concentration (vial mg ÷ water mL). The highlighted row is 1 mg.

mg to units by concentration (U-100 unless stated)
mg2.5 mg/mL5 mg + 2 mL5 mg/mL10 mg + 2 mL · used above10 mg/mL20 mg + 2 mL20 mg/mL60 mg + 3 mL
0.25 mg1052.51.25
0.5 mg201052.5
1 mg4020105
2 mg80402010
2.5 mg100502512.5
5 mg200*1005025
7.5 mg300*150*7537.5
10 mg400*200*10050
15 mg600*300*150*75
20 mg800*400*200*100
* More than a 1 mL (100-unit) syringe holds.

More conversions

Where 1 mg shows up in the cached labels and studies

The Ozempic label allows an increase to 1 mg once weekly, after at least 4 weeks on the 0.5 mg dose, where more glycemic control is needed.[3]

The phase 2 obesity trial of retatrutide included a 1 mg weekly arm among its subcutaneous doses, run for 48 weeks.[4]

DSIP was injected at 1 or 2 mg intravenously into 4 anesthetized dogs in an animal assay-development study, so this is not a human dose.[5]

1 mg read off a U-100 syringe

Starting from 1 mg, 1 mg measures 100 units at 1 mg/mL, 50 units at 2 mg/mL, 40 units at 2.5 mg/mL, 20 units at 5 mg/mL and 10 units at 10 mg/mL on a U-100 syringe.

Calculated from mg 1; mg per mL 1, 2, 2.5, 5, 10; units per mL 100; source mg-to-units. Formula: units = 1 / (mg per mL) x 100 [mg-to-units]

For 1 mg, against the 30, 50 and 100 unit barrels, 1 mg gives 100 units at 1 mg/mL (needs a 1 mL (100-unit) barrel); 50 units at 2 mg/mL (needs at least a 0.5 mL (50-unit) barrel); 40 units at 2.5 mg/mL (needs at least a 0.5 mL (50-unit) barrel); 20 units at 5 mg/mL (fits a 0.3 mL (30-unit) barrel); 10 units at 10 mg/mL (fits a 0.3 mL (30-unit) barrel).

Calculated from mg 1; mg per mL 1, 2, 2.5, 5, 10; barrel units 30, 50, 100; hard to measure below units 5; source mg-to-units. Formula: units = 1 / (mg per mL) x 100, compared with 30, 50, 100 and 5 [mg-to-units]

Common questions

How many units is 1 mg?

With 1 mg in mind, a 10 mg vial mixed with 3 mL of water has a strength of 3.33 mg/mL, so 1 mg is 30 units.

Calculated from vial mg 10; water mL 3; dose mg 1; units per mL 100; source mg-to-units. Formula: units = 1 / (10 / 3) x 100 = 30 [mg-to-units]

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3OZEMPIC prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
  4. 4Triple-Hormone-Receptor Agonist Retatrutide for Obesity - A Phase 2 Trial.The New England journal of medicine · 2023PMID 37366315Accessed 2 Oct 2026
  5. 5Development of an enzyme immunoassay for delta sleep-inducing peptide (DSIP) and its use in the determination of the metabolic clearance rate of DSIP administered to dogs.Neuroendocrinology · 1984PMID 6379493Accessed 2 Oct 2026

Found an error? Report a correction.