Skip to content
Peptigraph home

GHK-Cu reconstitution calculator

Medically reviewed by Juan Pablo Frías, MD · · DisclosureUpdated Educational use only
1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
6units
= 0.06 mL on a 1 mL U-100 insulin syringe
50 mg vial3 mL water1 mg dose
Concentration
16.67 mg/mL
Doses per vial
50
Weeks (1 dose/wk)
50
Math only. It does not recommend a dose. GHK-Cu: Injectable off Category 2 (Apr 2026).

6 units (0.06 mL) on a 1 mL U-100 syringe: 1 mg from a 50 mg vial + 3 mL water (GHK-Cu).

Dosing table for a 50 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

GHK-Cu: U-100 syringe units per dose for a 50 mg vial
Dose2 mL water2.5 mL water3 mL water5 mL water
0.5 mg22.535
1 mg45610
1.5 mg67.5915
2 mg8101220
2.5 mg1012.51525
3 mg12151830
5 mg20253050

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

50 mg ÷ 3 mL = 16.67 mg/mL
1 mg ÷ 16.67 mg/mL = 0.06 mL
0.06 mL × 100 = 6 units

How many units is 1 mg of GHK-Cu?

With a 50 mg vial and 3 mL of bacteriostatic water, 1 mg is 6 units (0.06 mL) on a U-100 syringe. With 2.5 mL of water it is 5 units. The answer always depends on how much water was added.

How much bacteriostatic water for a 50 mg GHK-Cu vial?

The water only sets the concentration; the amount of GHK-Cu in the vial stays the same. 3 mL makes 16.667 mg/mL, so 1 mg is 6 units. 5 mL makes 10 mg/mL, so the same 1 mg is 10 units. More water makes small doses easier to measure but needs more volume per injection.

How many 1 mg doses are in a 50 mg vial?

50 ÷ 1 = 50, so 50 full doses of 1 mg. Any liquid lost in the needle and vial is not counted.

How to reconstitute GHK-Cu?

No regulator label exists for GHK-Cu, so there is no instruction to cite; a published human trial in diabetic ulcers used a ready-made topical gel, which needs no reconstitution.[6]

How much bac water for GHK-Cu?

For a 50 mg vial, 1 mL gives 50 mg/mL, 2 mL gives 25 mg/mL and 5 mL gives 10 mg/mL; the volume is chosen to make a readable syringe amount, not to match a trial.

Calculated from vial mg 50; water m L 1, 2, 5. Formula: 50/1 = 50; 50/2 = 25; 50/5 = 10 mg/mL

How many mg is 10 units of GHK-Cu?

10 units is 0.1 mL, so 2.5 mg at 25 mg/mL (50 mg in 2 mL) or 5 mg at 50 mg/mL (100 mg in 2 mL).

Calculated from units 10; mg per m L 25, 50. Formula: 10 units = 0.1 mL; 0.1 x 25 = 2.5; 0.1 x 50 = 5 mg

How much bac water for a 50 mg or 100 mg GHK-Cu vial?

A 50 mg GHK-Cu vial: 2 mL gives 25 mg/mL (2.5 mg per 10 units); 3 mL gives 16.67 mg/mL (1.67 mg per 10 units); 5 mL gives 10 mg/mL (1 mg per 10 units). A 100 mg vial: 2 mL gives 50 mg/mL (5 mg per 10 units); 3 mL gives 33.33 mg/mL (3.33 mg per 10 units); 5 mL gives 20 mg/mL (2 mg per 10 units). The 100 mg vial is twice as concentrated at every volume.

Calculated from vial mg 50, 100; water m L 2, 3, 5. Formula: mg/mL = vial_mg / water_mL; mg per 10 units = mg/mL x 0.1

Preset doses are round numbers for the arithmetic, not dosing guidance. Vial sizes are the ones most often mentioned for GHK-Cu in community discussions.

6 units · 0.06 mL · 1 mg from 50 mg + 3 mL

What was actually injected, and at what strength

The only injected GHK-Cu strength in the indexed literature comes from a rat knee-ligament study that compared saline with 0.3 and 3 mg/ml solutions; this was an animal experiment.[3]

Those rats received the solution by injection into the joint once a week for 4 weeks, starting at week 2.[3]

The large human injection series did not use GHK-Cu alone: 1000 patients had a scalp formulation that also contained growth factors and thymosin beta-4.[4]

The diabetic-ulcer and wound studies used topical gel, not injection; one rat wound study used a 2% gel applied daily.[5]

The concentration gap between rat studies and a 50 mg vial

A 50 mg vial mixed with 2 mL is 25 mg/mL, about 8.3 times the 3 mg/ml rat solution. At that strength 1 unit on a U-100 syringe is 0.25 mg, so 10 units is 2.5 mg.

Calculated from vial mg 50; water m L 2; rat mg per m L 3. Formula: 50 / 2 = 25 mg/mL; 25 / 3 = 8.33; 25 x 0.01 = 0.25 mg per unit

Reaching the 3 mg/ml rat strength from a 50 mg vial would take about 16.7 mL of water, from a 100 mg vial about 33.3 mL, and from a 200 mg vial about 66.7 mL; the 0.3 mg/ml arm would take 10 times more. None of these volumes can be drawn into a 1 mL syringe.

Calculated from vial mg 50, 100, 200; target mg per m L 3. Formula: 50/3 = 16.7; 100/3 = 33.3; 200/3 = 66.7 mL

The calculator therefore treats vial size as the free variable and offers no study-based default; at 2 mL a 100 mg vial is 50 mg/mL, and a 200 mg vial 100 mg/mL, at which a single unit is already a full milligram.

Calculated from vial mg 100, 200; water m L 2. Formula: 100/2 = 50 mg/mL; 200/2 = 100 mg/mL; 100 mg/mL x 0.01 mL = 1 mg per unit

Pitfalls with large GHK-Cu vials

At 25 mg/mL (50 mg in 2 mL) the smallest readable step is about 1 unit, or 0.25 mg, and half-unit reads of a U-100 syringe are 0.125 mg. Dose steps below that cannot be drawn from this vial.

Calculated from mg per m L 25; unit m L 0.01. Formula: 25 x 0.01 = 0.25 mg per unit; half a unit = 0.125 mg

A 50 mg vial mixed with 2 mL holds 200 units across 2 syringes (100 units each), so even a single vial is a stack of draws; at a hypothetical 2.5 mg a draw it would hold 20 of them.

Calculated from vial mg 50; water m L 2; draw mg 2.5. Formula: 2 mL x 100 = 200 units; 50 / 2.5 = 20 draws

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3Tripeptide-copper complex GHK-Cu (II) transiently improved healing outcome in a rat model of ACL reconstruction.Journal of orthopaedic research : official publication of the Orthopaedic Research Society · 2015PMID 25731775Accessed 2 Oct 2026
  4. 4Intradermal injections of a hair growth factor formulation for enhancement of human hair regrowth - safety and efficacy evaluation in a first-in-man pilot clinical study.Journal of cosmetic and laser therapy : official publication of the European Society for Laser Dermatology · 2018PMID 29482481Accessed 2 Oct 2026
  5. 5The effect of topical tripeptide-copper complex on healing of ischemic open wounds.Veterinary surgery : VS · 2003PMID 14648529Accessed 2 Oct 2026
  6. 6Enhanced healing of ulcers in patients with diabetes by topical treatment with glycyl-l-histidyl-l-lysine copper.Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society · 1994PMID 17147644Accessed 2 Oct 2026

Found an error? Report a correction.