MOTS-c reconstitution calculator
- Concentration
- 5 mg/mL
- Doses per vial
- 10
- Weeks (1 dose/wk)
- 10
20 units (0.2 mL) on a 1 mL U-100 syringe: 1 mg from a 10 mg vial + 2 mL water (MOTS-c).
Dosing table for a 10 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 0.5 mg | 5 | 10 | 12.5 | 15 |
| 1 mg | 10 | 20 | 25 | 30 |
| 2 mg | 20 | 40 | 50 | 60 |
| 2.5 mg | 25 | 50 | 62.5 | 75 |
| 5 mg | 50 | 100 | 125 | 150 |
| 10 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
1 mg ÷ 5 mg/mL = 0.2 mL
0.2 mL × 100 = 20 units
How many units is 1 mg of MOTS-c?
With a 10 mg vial and 2 mL of bacteriostatic water, 1 mg is 20 units (0.20 mL) on a U-100 syringe. With 1 mL of water it is 10 units. The answer always depends on how much water was added.
How much bacteriostatic water for a 10 mg MOTS-c vial?
The water only sets the concentration; the amount of MOTS-c in the vial stays the same. 2 mL makes 5 mg/mL, so 1 mg is 20 units. 2.5 mL makes 4 mg/mL, so the same 1 mg is 25 units. More water makes small doses easier to measure but needs more volume per injection.
How many 1 mg doses are in a 10 mg vial?
10 ÷ 1 = 10, so 10 full doses of 1 mg. Any liquid lost in the needle and vial is not counted.
How to reconstitute MOTS-c?
No trial gives a reconstitution method for MOTS-c, so the only fixed part is arithmetic: a 10 mg vial plus 2 mL of water is 5 mg/mL; plus 1 mL is 10 mg/mL; plus 4 mL is 2.5 mg/mL.
Calculated from vial mg 10; water m L 1, 2, 4. Formula: 10/1 = 10; 10/2 = 5; 10/4 = 2.5 mg/mL
What is a MOTS-c 10mg dosage?
A vial label states the quantity of powder. The animal studies dose per kilogram of body weight, and the human studies measured natural levels, so no trial uses a whole-vial amount as its dose.[5]
Is there a MOTS-c 40mg dosage calculator figure?
A 40 mg vial in 4 mL is 10 mg/mL, so 1 unit is 0.1 mg and a 2 mg amount reads 20 units.
Calculated from vial mg 40; water m L 4; dose mg 2. Formula: 40/4 = 10 mg/mL; 2/10x100 = 20 units
How much water for a 20 mg or 40 mg MOTS-c vial?
A 20 mg vial in 2 mL is 10 mg/mL, so 1 mg reads 10 units; a 40 mg vial in 2 mL is 20 mg/mL (5 units per mg) and in 4 mL is 10 mg/mL (10 units per mg).
Calculated from vial mg 20, 40; water m L 20 2, 40 2, 4. Formula: mg/mL = vial_mg / water_mL; units per 1 mg = 100 / (mg/mL)
Preset doses are round numbers for the arithmetic, not dosing guidance. Vial sizes are the ones most often mentioned for MOTS-c in community discussions.
No published trial injected MOTS-c into people
The human MOTS-c papers in the evidence file measured the peptide that the body makes, for example in plasma before and after exercise; nobody in them was given it.[3]
A sixteen-week exercise study in breast cancer survivors likewise only tested plasma levels, using a lab-built ELISA.[4]
The doses that do exist are from mice, given per kilogram: 5 mg/kg once a day for 12 weeks in an ovariectomy bone-loss model.[5]
A muscle-wasting model in male mice used a higher amount, 15 mg/kg per day.[6]
Muscle samples from that model were collected after 8 days.[6]
The cell work used micromolar concentrations on a human bone-cell line, not mg amounts.[7]
Why the mouse figures do not become syringe units
A 40 mg vial mixed with 2 mL is 20 mg/mL, so each unit on a U-100 syringe is 0.2 mg. A 10 mg vial in 2 mL gives 5 mg/mL and 0.05 mg per unit.
Calculated from vials mg 40, water m L 2; mg 10, water m L 2. Formula: 40/2 = 20 mg/mL x 0.01 = 0.2 mg; 10/2 = 5 mg/mL x 0.01 = 0.05 mg
The two vial sizes people search for most, 40 mg and 10 mg, differ 4-fold, so the same syringe mark means a 4 times different amount.
Calculated from vial mg 40, 10. Formula: 40 / 10 = 4
Where the MOTS-c page can mislead
The calculator takes doses in mg. At 40 mg in 2 mL a 1 mg amount reads 5 units; at 40 mg in 1 mL (40 mg/mL) it reads 2.5 units, under the roughly 5-unit limit for reading a U-100 syringe.
Calculated from dose mg 1; vial mg 40; water m L 2, 1. Formula: 1/20x100 = 5; 1/40x100 = 2.5 units
MOTS-c 10 mg vial: units per mg at 1, 2 and 3 mL
A 10 mg MOTS-c vial is 10 mg/mL in 1 mL, 5 mg/mL in 2 mL and 3.33 mg/mL in 3 mL; 10 units then hold 1, 0.5 and 0.33 mg.
Calculated from vial mg 10; water m L 1, 2, 3; units 10. Formula: mg/mL = 10 / water_mL; mg in 10 units = mg/mL x 0.1
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Acute endurance exercise stimulates circulating levels of mitochondrial-derived peptides in humans.Journal of applied physiology (Bethesda, Md. : 1985) · 2021PMID 34351816Accessed 2 Oct 2026
- 4Effect of aerobic and resistance exercise on the mitochondrial peptide MOTS-c in Hispanic and Non-Hispanic White breast cancer survivors.Scientific reports · 2021PMID 34413391Accessed 2 Oct 2026
- 5Mitochondria related peptide MOTS-c suppresses ovariectomy-induced bone loss via AMPK activation.Biochemical and biophysical research communications · 2016PMID 27237975Accessed 2 Oct 2026
- 6Mitochondrial-derived microprotein MOTS-c attenuates immobilization-induced skeletal muscle atrophy by suppressing lipid infiltration.American journal of physiology. Endocrinology and metabolism · 2024PMID 38170165Accessed 2 Oct 2026
- 7MOTS-c improves osteoporosis by promoting the synthesis of type I collagen in osteoblasts via TGF-β/SMAD signaling pathway.European review for medical and pharmacological sciences · 2019PMID 31081069Accessed 2 Oct 2026
Found an error? Report a correction.