Skip to content
Peptigraph home

PT-141 10 mg Vial: Reconstitution and Dosing Chart

How much bacteriostatic water to add to a 10 mg vial of PT-141, the concentration you get, and a full dose-to-units chart.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureMelanocortin agonistUpdated
Vial size
10 mg
With 2 mL water
5 mg/mL
common choice
10 units contain
0.5 mg
at 2 mL, U-100
Whole vial
200 units
2 mL on a U-100 scale

How much water to add

Bacteriostatic water only changes the concentration, not the amount of PT-141 in the vial. More water means more units per dose (easier to read), less water means fewer.

PT-141 10 mg vial: concentration by water added
Water addedConcentration10 units contain1 mg isWhole vial
1 mL10 mg/mL1 mg10 u100 u
2 mL5 mg/mL0.5 mg20 u200 u
2.5 mL4 mg/mL0.4 mg25 u250 u
3 mL3.333 mg/mL0.333 mg30 u300 u

Calculator and full dosing table

Preset to the 10 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
30units
= 0.3 mL on a 1 mL U-100 insulin syringe
10 mg vial2 mL water1.5 mg dose
Concentration
5 mg/mL
Doses per vial
6
Weeks (1 dose/wk)
6
Math only. It does not recommend a dose.

30 units (0.3 mL) on a 1 mL U-100 syringe: 1.5 mg from a 10 mg vial + 2 mL water (PT-141).

Dosing table for a 10 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

PT-141: U-100 syringe units per dose for a 10 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.25 mg2.556.257.5
0.5 mg51012.515
1 mg10202530
1.5 mg153037.545
2 mg20405060
2.5 mg255062.575

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

10 mg ÷ 2 mL = 5 mg/mL
1.5 mg ÷ 5 mg/mL = 0.3 mL
0.3 mL × 100 = 30 units
30 units · 0.3 mL · 1.5 mg from 10 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where the doses for a 10 mg PT-141 vial come from

The Vyleesi label recommends 1.75 mg as needed, at least 45 minutes before anticipated sexual activity.[3]

The label says that giving more than 8 doses per month is not recommended.[3]

What a 10 mg vial gives

10 mg PT-141 vial, label dose only (dose -> supply -> units at 1 / 2 / 3 mL of water): 1.75 mg -> 5 doses, 1.25 mg left -> 17.5 / 35 / 52.5 units.

Calculated from vial mg 10; doses mg 1.75; dose sources label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

At 1.75 mg a 10 mg vial holds 5 full doses; against the label's ceiling of 8 doses per month that is 0.63 of a month of supply.

Calculated from vial mg 10; dose mg 1.75; label monthly max doses 8. Formula: floor(10 / 1.75) = 5; 5 / 8

Is 10 mg a labelled PT-141 strength?

Vyleesi is supplied as a 1.75 mg/0.3 mL single-dose autoinjector.[3]

Comparing a 10 mg PT-141 vial with the quoted Vyleesi autoinjector strength: 10 mg is above the largest labelled strength of 1.75 mg.

Calculated from vial mg 10; labelled strengths mg 1.75. Formula: compare vialMg with each labelled strength in mg

The labelled autoinjector is 5.83 mg/mL (1.75 mg in 0.3 mL), so its dose equals 30 units on a U-100 syringe, against 35 units at 2 mL (5 mg/mL) from this 10 mg vial.

Calculated from dose mg 1.75; volume mL 0.3; vial mg 10; water mL 2. Formula: 1.75 / 0.3 = 5.83 mg/mL; 0.3 x 100 = 30 units

Common questions

How much water goes in a 10 mg vial of PT-141?

That choice only changes the concentration. With 2 mL, a 10 mg vial is 5 mg/mL; with 1 mL it is 10 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.

How many units is 1 mg from a 10 mg vial?

With 2 mL of water, 1 mg is 20 units on a U-100 syringe. With other water amounts, see the table.

How many doses are in a 10 mg vial?

Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.

How much bacteriostatic water for a 10 mg PT-141 vial?

For PT-141, the water volume only changes the concentration: 10 mg in 1, 2 or 3 mL is 10, 5 or 3.33 mg/mL.

Calculated from vial mg 10; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

How do you reconstitute a 10 mg PT-141 vial?

With 2 mL of water the 10 mg PT-141 vial is 5 mg/mL, so each 0.01 mL unit holds 50 mcg.

Calculated from vial mg 10; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10

What amounts of PT-141 do the sources report, relative to a 10 mg vial?

The only PT-141 dose quoted on this page is the label's 1.75 mg, and the 10 mg vial table above shows how it divides; it is not a recommendation.

Calculated from vial mg 10; doses mg 0.75, 1.25, 1.75. Formula: see vial table

More on PT-141

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3VYLEESI prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.