Skip to content
Peptigraph home

2 mg PT-141 in Units: Syringe Chart

How many syringe units 2 mg of PT-141 is, for every common vial size and water volume, with the math shown.

Medical review pendingMelanocortin agonistUpdated
Amount
2 mg
At 5 mg/mL
40 units
e.g. 10 mg vial + 2 mL
At 10 mg/mL
20 units
e.g. 20 mg vial + 2 mL
Syringe
U-100
100 units = 1 mL

2 mg in units at common mixes

Units on a U-100 syringe (100 units = 1 mL) for a 2 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.

2 mg of PT-141 in syringe units
VialWaterConcentrationUnits for 2 mgVolume
10 mg1 mL10 mg/mL20 u0.20 mL
10 mg2 mL5 mg/mL40 u0.40 mL
10 mg3 mL3.333 mg/mL60 u0.60 mL

Calculator and full dosing table

Preset to 2 mg in a 10 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
40units
= 0.4 mL on a 1 mL U-100 insulin syringe
10 mg vial2 mL water2 mg dose
Concentration
5 mg/mL
Doses per vial
5
Weeks (1 dose/wk)
5
Math only. It does not recommend a dose.

40 units (0.4 mL) on a 1 mL U-100 syringe: 2 mg from a 10 mg vial + 2 mL water (PT-141).

Dosing table for a 10 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

PT-141: U-100 syringe units per dose for a 10 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.25 mg2.556.257.5
0.5 mg51012.515
1 mg10202530
1.5 mg153037.545
2 mg20405060
2.5 mg255062.575

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

10 mg ÷ 2 mL = 5 mg/mL
2 mg ÷ 5 mg/mL = 0.4 mL
0.4 mL × 100 = 40 units
40 units · 0.4 mL · 2 mg from 10 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Doses to set a 2 mg PT-141 vial against

The one label dose in play is 1.75 mg given subcutaneously as needed, at least 45 minutes before anticipated sexual activity.[3]

The 4 mg and 6 mg subcutaneous trial doses come from a crossover study in men with erectile dysfunction, not from the approved use.[4]

What a 2 mg vial gives

A 2 mg PT-141 vial mixed with 1, 2 or 3 mL of water is 2, 1, 0.667 mg/mL, so one U-100 unit carries 20, 10, 6.67 mcg.

Calculated from vial mg 2; water mL 1, 2, 3; units per mL 100. Formula: mg/mL = vialMg / waterMl; mcg per unit = mg/mL x 1000 / 100

Against the quoted doses, a 2 mg vial divides as follows (units at 1 / 2 / 3 mL; † marks under 5 units, hard to measure accurately): 1.75 mg (label dose): 1 doses, 0.25 mg left; 87.5 / 175 / 262.5 units; 4 mg (ED trial arm): 0 doses, 2 mg left; 200 / 400 / 600 units; 6 mg (ED trial arm): 0 doses, 2 mg left; 300 / 600 / 900 units.

Calculated from vial mg 2; water mL 1, 2, 3; units per mL 100; rows dose mg 1.75, doses 1, remainder mg 0.25, units 87.5, 175, 262.5; dose mg 4, doses 0, remainder mg 2, units 200, 400, 600; dose mg 6, doses 0, remainder mg 2, units 300, 600, 900. Formula: doses = floor(vialMg / doseMg); units = doseMg x waterMl / vialMg x 100

At the label's cap of 8 doses per month, a 2 mg vial holds 1 doses of 1.75 mg, which is 0.12 of one month at the cap.

Calculated from vial mg 2; dose mg 1.75; label monthly max doses 8. Formula: doses per vial / 8

Is 2 mg a labelled strength?

The labelled product is a single-dose autoinjector of 1.75 mg in 0.3 mL.[3]

A 2 mg vial is 1.14 times the labelled 1.75 mg autoinjector strength, and the label sells no multi-dose vial.

Calculated from vial mg 2; labelled strength mg 1.75. Formula: ratio = vialMg / 1.75

Common questions

How many units is 2 mg of PT-141?

It depends on the concentration. With a 10 mg vial and 2 mL of water (5 mg/mL), 2 mg is 40 units on a U-100 syringe. The table shows other mixes.

Is 2 mg a recommended dose of PT-141?

This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.

How many syringe units is a 2 mg PT-141 vial?

Drawing the full 2 mg vial into 1, 2 or 3 mL gives 2, 1, 0.667 mg/mL; the full vial is 100 units per mL of water used.

Calculated from vial mg 2; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

More on PT-141

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3VYLEESI prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
  4. 4Evaluation of the safety, pharmacokinetics and pharmacodynamic effects of subcutaneously administered PT-141, a melanocortin receptor agonist, in healthy male subjects and in patients with an inadequate response to Viagra.International journal of impotence research · 2004PMID 14999221Accessed 2 Oct 2026

Found an error? Report a correction.