Skip to content
Peptigraph home

2 mg Retatrutide in Units: Syringe Chart

How many syringe units 2 mg of Retatrutide is, for every common vial size and water volume, with the math shown.

Medical review pendingGLP-1 / GIP / glucagon triple agonistUpdated
Amount
2 mg
At 5 mg/mL
40 units
e.g. 10 mg vial + 2 mL
At 10 mg/mL
20 units
e.g. 20 mg vial + 2 mL
Syringe
U-100
100 units = 1 mL

2 mg in units at common mixes

Units on a U-100 syringe (100 units = 1 mL) for a 2 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.

2 mg of Retatrutide in syringe units
VialWaterConcentrationUnits for 2 mgVolume
5 mg1 mL5 mg/mL40 u0.40 mL
5 mg2 mL2.5 mg/mL80 u0.80 mL
5 mg3 mL1.667 mg/mL120 u (over 1 mL)1.20 mL
10 mg1 mL10 mg/mL20 u0.20 mL
10 mg2 mL5 mg/mL40 u0.40 mL
10 mg3 mL3.333 mg/mL60 u0.60 mL
12 mg1 mL12 mg/mL16.7 u0.17 mL
12 mg2 mL6 mg/mL33.3 u0.33 mL
12 mg3 mL4 mg/mL50 u0.50 mL
15 mg1 mL15 mg/mL13.3 u0.13 mL
15 mg2 mL7.5 mg/mL26.7 u0.27 mL
15 mg3 mL5 mg/mL40 u0.40 mL
20 mg1 mL20 mg/mL10 u0.10 mL
20 mg2 mL10 mg/mL20 u0.20 mL
20 mg3 mL6.667 mg/mL30 u0.30 mL
24 mg1 mL24 mg/mL8.3 u0.08 mL
24 mg2 mL12 mg/mL16.7 u0.17 mL
24 mg3 mL8 mg/mL25 u0.25 mL

Calculator and full dosing table

Preset to 2 mg in a 10 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
40units
= 0.4 mL on a 1 mL U-100 insulin syringe
10 mg vial2 mL water2 mg dose
Concentration
5 mg/mL
Doses per vial
5
Weeks (1 dose/wk)
5
Math only. It does not recommend a dose.

40 units (0.4 mL) on a 1 mL U-100 syringe: 2 mg from a 10 mg vial + 2 mL water (Retatrutide).

Dosing table for a 10 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

Retatrutide: U-100 syringe units per dose for a 10 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.5 mg51012.515
1 mg10202530
2 mg20405060
4 mg4080100120
6 mg60120150180
8 mg80160200240
10 mg100200250300

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

10 mg ÷ 2 mL = 5 mg/mL
2 mg ÷ 5 mg/mL = 0.4 mL
0.4 mL × 100 = 40 units
40 units · 0.4 mL · 2 mg from 10 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where 2 mg shows up in retatrutide studies

The 48-week phase 2 obesity trial gave retatrutide once weekly at 1 mg, 4 mg, 8 mg or 12 mg, with a 2 mg or 4 mg initial dose in some arms.[1]

In the phase 2 obesity trial, gastrointestinal events were partly mitigated by a 2 mg starting dose compared with a 4 mg one.[1]

How many units is 2 mg of retatrutide

2 mg of retatrutide drawn from vials mixed with 1 mL of water reads: 5 mg vial = 40 units; 10 mg vial = 20 units; 12 mg vial = 16.67 units; 15 mg vial = 13.33 units; 20 mg vial = 10 units; 24 mg vial = 8.33 units; 30 mg vial = 6.67 units; 36 mg vial = 5.56 units; 40 mg vial = 5 units; 50 mg vial = 4† units; 60 mg vial = 3.33† units. († marks a 2 mg reading under 5 units, hard to measure accurately; ‡ one over the 100 units a 1 mL U-100 syringe holds.)

Calculated from dose mg 2; vial sizes mg 5, 10, 12, 15, 20, 24, 30, 36, 40, 50, 60; water mL 1; u100 units per mL 100. Formula: units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

2 mg of retatrutide drawn from vials mixed with 2 mL of water reads: 5 mg vial = 80 units; 10 mg vial = 40 units; 12 mg vial = 33.33 units; 15 mg vial = 26.67 units; 20 mg vial = 20 units; 24 mg vial = 16.67 units; 30 mg vial = 13.33 units; 36 mg vial = 11.11 units; 40 mg vial = 10 units; 50 mg vial = 8 units; 60 mg vial = 6.67 units. († marks a 2 mg reading under 5 units, hard to measure accurately; ‡ one over the 100 units a 1 mL U-100 syringe holds.)

Calculated from dose mg 2; vial sizes mg 5, 10, 12, 15, 20, 24, 30, 36, 40, 50, 60; water mL 2; u100 units per mL 100. Formula: units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

2 mg of retatrutide drawn from vials mixed with 3 mL of water reads: 5 mg vial = 120‡ units; 10 mg vial = 60 units; 12 mg vial = 50 units; 15 mg vial = 40 units; 20 mg vial = 30 units; 24 mg vial = 25 units; 30 mg vial = 20 units; 36 mg vial = 16.67 units; 40 mg vial = 15 units; 50 mg vial = 12 units; 60 mg vial = 10 units. († marks a 2 mg reading under 5 units, hard to measure accurately; ‡ one over the 100 units a 1 mL U-100 syringe holds.)

Calculated from dose mg 2; vial sizes mg 5, 10, 12, 15, 20, 24, 30, 36, 40, 50, 60; water mL 3; u100 units per mL 100. Formula: units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

One 2 mg injection a week uses up each vial size as follows: 5 mg vial = 2 doses (1 mg left); 10 mg vial = 5 doses; 12 mg vial = 6 doses; 15 mg vial = 7 doses (1 mg left); 20 mg vial = 10 doses; 24 mg vial = 12 doses; 30 mg vial = 15 doses; 36 mg vial = 18 doses; 40 mg vial = 20 doses; 50 mg vial = 25 doses; 60 mg vial = 30 doses.

Calculated from dose mg 2; vial sizes mg 5, 10, 12, 15, 20, 24, 30, 36, 40, 50, 60; injections per week 1. Formula: doses = floor(vialMg / doseMg); left = vialMg - doses x doseMg

Is 2 mg a labelled retatrutide amount

With 0 matching applications in Drugs@FDA there is no labelled retatrutide amount to compare 2 mg with.

Calculated from dose mg 2; drugs fda matches 0; source s2-legal/api.fda.gov/drugsfda-retatrutide.txt. Formula: labelled amounts available = 0

Common questions

How many units is 2 mg of Retatrutide?

It depends on the concentration. With a 10 mg vial and 2 mL of water (5 mg/mL), 2 mg is 40 units on a U-100 syringe. The table shows other mixes.

Is 2 mg a recommended dose of Retatrutide?

This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.

How many syringe units is 2 mg of retatrutide?

From a 10 mg vial mixed with 2 mL of water (5 mg/mL), 2 mg reads 40 units on a U-100 syringe; the figure changes with the vial size and water volume.

Calculated from dose mg 2; vial mg 10; water mL 2. Formula: units = doseMg / (vialMg / waterMl) x 100

More on Retatrutide

Sources

  1. 1Triple-Hormone-Receptor Agonist Retatrutide for Obesity: A Phase 2 Trial (Jastreboff AM et al.)New England Journal of Medicine · 2023PMID 37366315Accessed 2 Oct 2026
  2. 2Retatrutide, a Triple Hormone Receptor Agonist, for Treatment of Obesity (TRIUMPH-1; Jastreboff AM et al.)New England Journal of Medicine · 2026PMID 42814954Accessed 2 Oct 2026
  3. 3A Phase 2 Study of Once-Weekly LY3437943 Compared With Placebo in Participants Who Have Obesity or Are Overweight With Weight-Related Comorbidities (NCT04881760; arms and posted results)ClinicalTrials.gov (U.S. National Library of Medicine) · 2021clinicaltrials.govAccessed 2 Oct 2026
  4. 4Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  5. 5BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.