Retatrutide 30 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 30 mg vial of Retatrutide, the concentration you get, and a full dose-to-units chart.
- Vial size
- 30 mg
- With 2 mL water
- 15 mg/mL
- common choice
- 10 units contain
- 1.5 mg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of Retatrutide in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 1 mg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 30 mg/mL | 3 mg | 3.3 u | 100 u |
| 2 mL | 15 mg/mL | 1.5 mg | 6.7 u | 200 u |
| 2.5 mL | 12 mg/mL | 1.2 mg | 8.3 u | 250 u |
| 3 mL | 10 mg/mL | 1 mg | 10 u | 300 u |
Calculator and full dosing table
Preset to the 30 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 15 mg/mL
- Doses per vial
- 15
- Weeks (1 dose/wk)
- 15
13.33 units (0.13 mL) on a 1 mL U-100 syringe: 2 mg from a 30 mg vial + 2 mL water (Retatrutide).
Dosing table for a 30 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 0.5 mg | 1.67 | 3.33 | 4.17 | 5 |
| 1 mg | 3.33 | 6.67 | 8.33 | 10 |
| 2 mg | 6.67 | 13.33 | 16.67 | 20 |
| 4 mg | 13.33 | 26.67 | 33.33 | 40 |
| 6 mg | 20 | 40 | 50 | 60 |
| 8 mg | 26.67 | 53.33 | 66.67 | 80 |
| 10 mg | 33.33 | 66.67 | 83.33 | 100 |
| 12 mg | 40 | 80 | 100 | 120 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
2 mg ÷ 15 mg/mL = 0.13 mL
0.13 mL × 100 = 13.33 units
Where the doses for a 30 mg retatrutide vial come from
The 80-week phase 3 trial in adults with obesity and no diabetes gave once-weekly subcutaneous retatrutide at 4 mg, 9 mg or 12 mg, or placebo.[2]
The 48-week phase 2 trial gave once-weekly subcutaneous retatrutide at 1 mg, 4 mg, 8 mg or 12 mg (with initial doses of 2 mg or 4 mg in some arms), or placebo.[1]
Retatrutide trial doses converted to syringe units (30 mg vial)
ClinicalTrials.gov lists a phase 2 obesity arm that stepped retatrutide from a 2 mg start through 4 mg and 8 mg up to 12 mg, hence the 2 mg row in this chart.[3]
1 mg from a 30 mg vial: 30 doses; 3.33 (<5, hard to measure accurately) / 6.67 / 10 units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 1; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
2 mg from a 30 mg vial: 15 doses; 6.67 / 13.33 / 20 units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 2; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
4 mg from a 30 mg vial: 7 doses, 2 mg left over; 13.33 / 26.67 / 40 units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 4; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
8 mg from a 30 mg vial: 3 doses, 6 mg left over; 26.67 / 53.33 / 80 units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 8; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
9 mg from a 30 mg vial: 3 doses, 3 mg left over; 30 / 60 / 90 units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 9; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
12 mg from a 30 mg vial: 2 doses, 6 mg left over; 40 / 80 / 120 (>100, over one 1 mL syringe) units at 1 / 2 / 3 mL of water.
Calculated from vial mg 30; dose mg 12; water mL 1, 2, 3; u100 units per mL 100; dose source trial doses quoted on this page (1 mg, 2 mg step-up start, 4, 8, 9, 12 mg). Formula: full doses = floor(vialMg / doseMg); leftover = vialMg - doses x doseMg; units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
Every row for the 30 mg vial is a trial dose converted to syringe units, not a schedule to follow.
Calculated from vial mg 30. Formula: presentation note; see rows above
Is 30 mg a labelled retatrutide strength?
With 0 matching applications in Drugs@FDA there is no labelled strength to compare a 30 mg retatrutide vial with.
Calculated from vial mg 30; drugs fda matches 0; source s2-legal/api.fda.gov/drugsfda-retatrutide.txt. Formula: labelled strengths available = 0
Market price of 30 mg vials
Single-vial listings at 30 mg had a median of $230.00 across 25 listings (range $105.00 to $450.00), or $7.67 per mg, in the price dataset checked 2026-10-02.
Calculated from source our price listings dataset; peptide retatrutide; vial mg 30; median 230; listings 25; min 105; max 450; median per mg 7.67. Formula: median / vialMg = medianPerMg
Common questions
How much water goes in a 30 mg vial of Retatrutide?
That choice only changes the concentration. With 2 mL, a 30 mg vial is 15 mg/mL; with 1 mL it is 30 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 1 mg from a 30 mg vial?
With 2 mL of water, 1 mg is 6.7 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 30 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How do you reconstitute reta 30mg?
With 2 mL of water the 30 mg retatrutide vial is 15 mg/mL, so each 0.01 mL unit holds 150 mcg.
Calculated from vial mg 30; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10
What is the dosage for reta 30mg?
The doses used here (1, 4, 8, 9 and 12 mg) are trial arms, not recommendations; the 30 mg vial table shows how each divides.
Calculated from vial mg 30; doses mg 1, 4, 8, 9, 12. Formula: see vial table
More on Retatrutide
Sources
- 1Triple-Hormone-Receptor Agonist Retatrutide for Obesity: A Phase 2 Trial (Jastreboff AM et al.)New England Journal of Medicine · 2023PMID 37366315Accessed 2 Oct 2026
- 2Retatrutide, a Triple Hormone Receptor Agonist, for Treatment of Obesity (TRIUMPH-1; Jastreboff AM et al.)New England Journal of Medicine · 2026PMID 42814954Accessed 2 Oct 2026
- 3A Phase 2 Study of Once-Weekly LY3437943 Compared With Placebo in Participants Who Have Obesity or Are Overweight With Weight-Related Comorbidities (NCT04881760; arms and posted results)ClinicalTrials.gov (U.S. National Library of Medicine) · 2021clinicaltrials.govAccessed 2 Oct 2026
- 4Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 5BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
Found an error? Report a correction.