Skip to content
Peptigraph home

SS-31 50 mg Vial: Reconstitution and Dosing Chart

How much bacteriostatic water to add to a 50 mg vial of SS-31, the concentration you get, and a full dose-to-units chart.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureMitochondria-targeting peptideUpdated
Vial size
50 mg
With 2 mL water
25 mg/mL
common choice
10 units contain
2.5 mg
at 2 mL, U-100
Whole vial
200 units
2 mL on a U-100 scale

How much water to add

Bacteriostatic water only changes the concentration, not the amount of SS-31 in the vial. More water means more units per dose (easier to read), less water means fewer.

SS-31 50 mg vial: concentration by water added
Water addedConcentration10 units contain1 mg isWhole vial
1 mL50 mg/mL5 mg2 u100 u
2 mL25 mg/mL2.5 mg4 u200 u
2.5 mL20 mg/mL2 mg5 u250 u
3 mL16.667 mg/mL1.667 mg6 u300 u

Calculator and full dosing table

Preset to the 50 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
20units
= 0.2 mL on a 1 mL U-100 insulin syringe
50 mg vial2 mL water5 mg dose
Concentration
25 mg/mL
Doses per vial
10
Weeks (1 dose/wk)
10
Math only. It does not recommend a dose.

20 units (0.2 mL) on a 1 mL U-100 syringe: 5 mg from a 50 mg vial + 2 mL water (SS-31).

Dosing table for a 50 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

SS-31: U-100 syringe units per dose for a 50 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.5 mg122.53
1 mg2456
2 mg481012
5 mg10202530
10 mg20405060

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

50 mg ÷ 2 mL = 25 mg/mL
5 mg ÷ 25 mg/mL = 0.2 mL
0.2 mL × 100 = 20 units
20 units · 0.2 mL · 5 mg from 50 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where the doses for a 50 mg SS-31 vial come from

The same label lists 20 mg once daily for patients with severe kidney impairment who are not on dialysis.[3]

What a 50 mg vial gives

50 mg SS-31 vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 20 mg -> 2 doses = 2 days, 10 mg left -> 40 / 80 / 120 (>100, over one 1 mL syringe) units; 40 mg -> 1 dose = 1 day, 10 mg left -> 80 / 160 (>100, over one 1 mL syringe) / 240 (>100, over one 1 mL syringe) units.

Calculated from vial mg 50; doses mg 20, 40; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

Is 50 mg a labelled SS-31 strength?

Comparing a 50 mg SS-31 vial with the quoted Forzinity vial total: 50 mg is below the smallest labelled strength of 280 mg.

Calculated from vial mg 50; labelled strengths mg 280. Formula: compare vialMg with each labelled strength in mg

At the labelled 80 mg/mL a 40 mg daily dose is 0.5 mL, or 50 units on a U-100 syringe, and a 20 mg dose is 0.25 mL or 25 units; this 50 mg vial at 1 mL (50 mg/mL) would need 80 units for 40 mg.

Calculated from dose mg 40, 20; label concentration mg per mL 80; vial mg 50; water mL 1. Formula: mL = dose / 80; units = mL x 100; vial units = dose / (vialMg / 1) x 100

Common questions

How much water goes in a 50 mg vial of SS-31?

That choice only changes the concentration. With 2 mL, a 50 mg vial is 25 mg/mL; with 1 mL it is 50 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.

How many units is 1 mg from a 50 mg vial?

With 2 mL of water, 1 mg is 4 units on a U-100 syringe. With other water amounts, see the table.

How many doses are in a 50 mg vial?

Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.

How much bacteriostatic water goes into a 50 mg SS-31 vial?

For SS-31, the water volume only changes the concentration: 50 mg in 1, 2 or 3 mL is 50, 25 or 16.67 mg/mL.

Calculated from vial mg 50; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

How do you reconstitute a 50 mg SS-31 vial?

With 2 mL of water the 50 mg SS-31 vial is 25 mg/mL, so each 0.01 mL unit holds 250 mcg.

Calculated from vial mg 50; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10

What do trials and labels say about doses for a 50 mg SS-31 vial?

The SS-31 doses on this page come from trials and labels (20, 40 mg), and the 50 mg vial table above shows how each divides; it is not a recommendation.

Calculated from vial mg 50; doses mg 20, 40. Formula: see vial table

More on SS-31

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3FORZINITY prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.