Skip to content
Peptigraph home

Semax reconstitution calculator

Medically reviewed by Juan Pablo Frías, MD · · DisclosureUpdated Educational use only
1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
12units
= 0.12 mL on a 1 mL U-100 insulin syringe
5 mg vial2 mL water300 mcg dose
Concentration
2.5 mg/mL
Doses per vial
16
Weeks (1 dose/wk)
16
Math only. It does not recommend a dose. Semax: PCAC voted 8–5 for 503A (Jul 2026).

12 units (0.12 mL) on a 1 mL U-100 syringe: 300 mcg from a 5 mg vial + 2 mL water (Semax).

Dosing table for a 5 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

Semax: U-100 syringe units per dose for a 5 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
100 mcg2456
250 mcg51012.515
300 mcg6121518
500 mcg10202530
750 mcg153037.545
1000 mcg20405060

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

5 mg ÷ 2 mL = 2.5 mg/mL
300 mcg = 0.3 mg; 0.3 mg ÷ 2.5 mg/mL = 0.12 mL
0.12 mL × 100 = 12 units

How many units is 300 mcg of Semax?

With a 5 mg vial and 2 mL of bacteriostatic water, 300 mcg is 12 units (0.12 mL) on a U-100 syringe. With 1 mL of water it is 6 units. The answer always depends on how much water was added.

How much bacteriostatic water for a 5 mg Semax vial?

The water only sets the concentration; the amount of Semax in the vial stays the same. 2 mL makes 2.5 mg/mL, so 300 mcg is 12 units. 2.5 mL makes 2 mg/mL, so the same 300 mcg is 15 units. More water makes small doses easier to measure but needs more volume per injection.

How many 300 mcg doses are in a 5 mg vial?

5 mg is 5,000 mcg; 5,000 ÷ 300 = 16.67, so 16 full doses of 300 mcg. Any liquid lost in the needle and vial is not counted.

How to reconstitute Semax?

There is no label. The arithmetic is generic: a 30 mg vial in 2 mL is 15 mg/mL and a 10 mg vial in 2 mL is 5 mg/mL.

Calculated from vials mg 30, 10; water m L 2. Formula: 30/2 = 15; 10/2 = 5 mg/mL

How much bac water for Semax?

As arithmetic only (no label exists): in a 30 mg Semax vial, 3 mL gives 10 mg/mL and 6 mL gives 5 mg/mL; at 10 mg/mL each unit is 0.1 mg, or 100 mcg.

Calculated from vial mg 30; water m L 3, 6. Formula: 30/3 = 10; 30/6 = 5 mg/mL; 10 x 0.01 = 0.1 mg per unit

Preset doses are round numbers for the arithmetic, not dosing guidance. Vial sizes are the ones most often mentioned for Semax in community discussions.

12 units · 0.12 mL · 300 mcg from 5 mg + 2 mL

The human Semax regimens are nasal and large in milligram terms

In stroke rehabilitation patients, the standard Semax regimen was 2 courses at 6000 mcg/day for 10 days, with a 20-day interval between courses.[3]

In peptic ulcer, Semax was given intranasally as a 1% solution, 2-4 drops 3 times a day for 10 days; ulcer healing was reported in 89.5% of those patients by day 14 against 30.8% in controls.[4]

A rat study tracked intranasal Semax at 50 microg/kg in 20 microl of solution, in animals of 200-250 g body mass.[5]

What those figures mean for a 5, 10 or 30 mg injection vial

6000 mcg is 6 mg a day. Over 10 days that is 60 mg per course and 120 mg across 2 courses, or 4 of the largest 30 mg vials on the calculator.

Calculated from mg per day 6; days 10; courses 2; vial mg 30. Formula: 6x10 = 60 mg; 60x2 = 120 mg; 120/30 = 4 vials

From a 30 mg vial mixed with 2 mL (15 mg/mL) a 6 mg amount reads 40 units; from a 10 mg vial in 2 mL (5 mg/mL) it reads 120 units, more than the 100 units a 1 mL syringe holds; from a 5 mg vial it is more than the whole vial.

Calculated from dose mg 6; vials mg 30, water m L 2; mg 10, water m L 2; mg 5, water m L 2. Formula: 6/15x100 = 40; 6/5x100 = 120; 6 > 5 mg

A 1% solution is 10 mg/mL (1 g per 100 mL). The rat intranasal dose of 50 microg/kg in 20 microl for a 200-250 g animal is 10-12.5 microg, a strength of 0.5-0.625 mg/mL, about 16 to 20 times weaker than a 1% solution.

Calculated from solution pct 1; µg per kg 50; kg 0.2, 0.25; volume U L 20. Formula: 1% = 10 mg/mL; 50x0.2 = 10 ug, 50x0.25 = 12.5 ug; 10 ug/0.02 mL = 0.5 mg/mL; 12.5/0.02 = 0.625; 10/0.625 = 16; 10/0.5 = 20

The route matters more than the vial

Every human regimen quoted above is a spray or drops route, which does not use a U-100 syringe. If a 5 mg vial in 2 mL (2.5 mg/mL) were used for a 2 mg amount, the draw would be 80 units, but no cached trial used that route or that amount.

Calculated from vial mg 5; water m L 2; dose mg 2. Formula: 2/2.5x100 = 80 units

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3[The efficacy of semax in the tretament of patients at different stages of ischemic stroke].Zhurnal nevrologii i psikhiatrii imeni S.S. Korsakova · 2018PMID 29798983Accessed 2 Oct 2026
  4. 4Therapy of peptic ulcer with semax peptide.Bulletin of experimental biology and medicine · 2002PMID 12459874Accessed 2 Oct 2026
  5. 5[Kinetics of Semax penetration into the brain and blood of rats after its intranasal administration].Bioorganicheskaia khimiia · 2006PMID 16523722Accessed 2 Oct 2026

Found an error? Report a correction.