Skip to content
Peptigraph home

Tesamorelin 10 mg Vial: Reconstitution and Dosing Chart

How much bacteriostatic water to add to a 10 mg vial of Tesamorelin, the concentration you get, and a full dose-to-units chart.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureGHRH analogUpdated
Vial size
10 mg
With 2 mL water
5 mg/mL
common choice
10 units contain
0.5 mg
at 2 mL, U-100
Whole vial
200 units
2 mL on a U-100 scale

How much water to add

Bacteriostatic water only changes the concentration, not the amount of Tesamorelin in the vial. More water means more units per dose (easier to read), less water means fewer.

Tesamorelin 10 mg vial: concentration by water added
Water addedConcentration10 units contain1 mg isWhole vial
1 mL10 mg/mL1 mg10 u100 u
2 mL5 mg/mL0.5 mg20 u200 u
2.5 mL4 mg/mL0.4 mg25 u250 u
3 mL3.333 mg/mL0.333 mg30 u300 u

Calculator and full dosing table

Preset to the 10 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
30units
= 0.3 mL on a 1 mL U-100 insulin syringe
10 mg vial2 mL water1.5 mg dose
Concentration
5 mg/mL
Doses per vial
6
Weeks (1 dose/wk)
6
Math only. It does not recommend a dose.

30 units (0.3 mL) on a 1 mL U-100 syringe: 1.5 mg from a 10 mg vial + 2 mL water (Tesamorelin).

Dosing table for a 10 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

Tesamorelin: U-100 syringe units per dose for a 10 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.5 mg51012.515
1 mg10202530
1.5 mg153037.545
2 mg20405060
2.5 mg255062.575
3 mg30607590

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

10 mg ÷ 2 mL = 5 mg/mL
1.5 mg ÷ 5 mg/mL = 0.3 mL
0.3 mL × 100 = 30 units
30 units · 0.3 mL · 1.5 mg from 10 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where the doses for a 10 mg tesamorelin vial come from

The pivotal HIV lipodystrophy trial gave 2 mg of tesamorelin as a daily injection for 26 weeks.[3]

A 12-week dose-ranging trial of tesamorelin (then called TH9507) gave 1 mg subcutaneously once daily.[4]

What a 10 mg vial gives

10 mg tesamorelin vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 10 doses = 10 days -> 10 / 20 / 30 units; 1.28 mg -> 7 doses = 7 days, 1.04 mg left -> 12.8 / 25.6 / 38.4 units; 1.4 mg -> 7 doses = 7 days, 0.2 mg left -> 14 / 28 / 42 units; 2 mg -> 5 doses = 5 days -> 20 / 40 / 60 units.

Calculated from vial mg 10; doses mg 1, 1.28, 1.4, 2; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

Is 10 mg a labelled tesamorelin strength?

The Egrifta SV label describes a 2 mg single-dose vial.[5]

The Egrifta WR label describes an 11.6 mg vial of lyophilised powder.[6]

Comparing a 10 mg tesamorelin vial with the quoted Egrifta SV and Egrifta WR vial strengths: 10 mg falls between the labelled 2 mg and 11.6 mg.

Calculated from vial mg 10; labelled strengths mg 2, 11.6. Formula: compare vialMg with each labelled strength in mg

Common questions

How much water goes in a 10 mg vial of Tesamorelin?

That choice only changes the concentration. With 2 mL, a 10 mg vial is 5 mg/mL; with 1 mL it is 10 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.

How many units is 1 mg from a 10 mg vial?

With 2 mL of water, 1 mg is 20 units on a U-100 syringe. With other water amounts, see the table.

How many doses are in a 10 mg vial?

Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.

How much bacteriostatic water goes into a 10 mg tesamorelin vial?

For tesamorelin, the water volume only changes the concentration: 10 mg in 1, 2 or 3 mL is 10, 5 or 3.33 mg/mL.

Calculated from vial mg 10; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

How do you reconstitute a 10 mg tesamorelin vial?

With 2 mL of water the 10 mg tesamorelin vial is 5 mg/mL, so each 0.01 mL unit holds 50 mcg.

Calculated from vial mg 10; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10

What do trials and labels say about doses for a 10 mg tesamorelin vial?

The tesamorelin doses on this page come from trials and labels (1, 1.28, 1.4, 2 mg), and the 10 mg vial table above shows how each divides; it is not a recommendation.

Calculated from vial mg 10; doses mg 1, 1.28, 1.4, 2. Formula: see vial table

More on Tesamorelin

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3Metabolic effects of a growth hormone-releasing factor in patients with HIV.The New England journal of medicine · 2007PMID 18057338Accessed 2 Oct 2026
  4. 4A placebo-controlled, dose-ranging study of a growth hormone releasing factor in HIV-infected patients with abdominal fat accumulation.AIDS (London, England) · 2005PMID 16052083Accessed 2 Oct 2026
  5. 5EGRIFTA SV prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
  6. 6EGRIFTA WR prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.