Skip to content
Peptigraph home

Tesamorelin 20 mg Vial: Reconstitution and Dosing Chart

How much bacteriostatic water to add to a 20 mg vial of Tesamorelin, the concentration you get, and a full dose-to-units chart.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureGHRH analogUpdated
Vial size
20 mg
With 2 mL water
10 mg/mL
common choice
10 units contain
1 mg
at 2 mL, U-100
Whole vial
200 units
2 mL on a U-100 scale

How much water to add

Bacteriostatic water only changes the concentration, not the amount of Tesamorelin in the vial. More water means more units per dose (easier to read), less water means fewer.

Tesamorelin 20 mg vial: concentration by water added
Water addedConcentration10 units contain1 mg isWhole vial
1 mL20 mg/mL2 mg5 u100 u
2 mL10 mg/mL1 mg10 u200 u
2.5 mL8 mg/mL0.8 mg12.5 u250 u
3 mL6.667 mg/mL0.667 mg15 u300 u

Calculator and full dosing table

Preset to the 20 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
15units
= 0.15 mL on a 1 mL U-100 insulin syringe
20 mg vial2 mL water1.5 mg dose
Concentration
10 mg/mL
Doses per vial
13
Weeks (1 dose/wk)
13
Math only. It does not recommend a dose.

15 units (0.15 mL) on a 1 mL U-100 syringe: 1.5 mg from a 20 mg vial + 2 mL water (Tesamorelin).

Dosing table for a 20 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

Tesamorelin: U-100 syringe units per dose for a 20 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
0.5 mg2.556.257.5
1 mg51012.515
1.5 mg7.51518.7522.5
2 mg10202530
2.5 mg12.52531.2537.5
3 mg153037.545

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

20 mg ÷ 2 mL = 10 mg/mL
1.5 mg ÷ 10 mg/mL = 0.15 mL
0.15 mL × 100 = 15 units
15 units · 0.15 mL · 1.5 mg from 20 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where the doses for a 20 mg tesamorelin vial come from

A 12-week dose-ranging trial of tesamorelin (then called TH9507) gave 2 mg subcutaneously once daily.[3]

The Egrifta WR label gives 1.28 mg once daily.[4]

What a 20 mg vial gives

20 mg tesamorelin vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 20 doses = 20 days -> 5 / 10 / 15 units; 1.28 mg -> 15 doses = 15 days, 0.8 mg left -> 6.4 / 12.8 / 19.2 units; 1.4 mg -> 14 doses = 14 days, 0.4 mg left -> 7 / 14 / 21 units; 2 mg -> 10 doses = 10 days -> 10 / 20 / 30 units.

Calculated from vial mg 20; doses mg 1, 1.28, 1.4, 2; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

Is 20 mg a labelled tesamorelin strength?

Comparing a 20 mg tesamorelin vial with the quoted Egrifta SV and Egrifta WR vial strengths: 20 mg is above the largest labelled strength of 11.6 mg.

Calculated from vial mg 20; labelled strengths mg 2, 11.6. Formula: compare vialMg with each labelled strength in mg

Common questions

How much water goes in a 20 mg vial of Tesamorelin?

That choice only changes the concentration. With 2 mL, a 20 mg vial is 10 mg/mL; with 1 mL it is 20 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.

How many units is 1 mg from a 20 mg vial?

With 2 mL of water, 1 mg is 10 units on a U-100 syringe. With other water amounts, see the table.

How many doses are in a 20 mg vial?

Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.

How much bacteriostatic water goes into a 20 mg tesamorelin vial?

For tesamorelin, the water volume only changes the concentration: 20 mg in 1, 2 or 3 mL is 20, 10 or 6.67 mg/mL.

Calculated from vial mg 20; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

How do you reconstitute a 20 mg tesamorelin vial?

With 2 mL of water the 20 mg tesamorelin vial is 10 mg/mL, so each 0.01 mL unit holds 100 mcg.

Calculated from vial mg 20; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10

What do trials and labels say about doses for a 20 mg tesamorelin vial?

The tesamorelin doses on this page come from trials and labels (1, 1.28, 1.4, 2 mg), and the 20 mg vial table above shows how each divides; it is not a recommendation.

Calculated from vial mg 20; doses mg 1, 1.28, 1.4, 2. Formula: see vial table

More on Tesamorelin

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3A placebo-controlled, dose-ranging study of a growth hormone releasing factor in HIV-infected patients with abdominal fat accumulation.AIDS (London, England) · 2005PMID 16052083Accessed 2 Oct 2026
  4. 4EGRIFTA WR prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.