Tesamorelin 2 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 2 mg vial of Tesamorelin, the concentration you get, and a full dose-to-units chart.
- Vial size
- 2 mg
- With 2 mL water
- 1 mg/mL
- common choice
- 10 units contain
- 0.1 mg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of Tesamorelin in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 1 mg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 2 mg/mL | 0.2 mg | 50 u | 100 u |
| 2 mL | 1 mg/mL | 0.1 mg | 100 u | 200 u |
| 2.5 mL | 0.8 mg/mL | 0.08 mg | 125 u | 250 u |
| 3 mL | 0.667 mg/mL | 0.067 mg | 150 u | 300 u |
Calculator and full dosing table
Preset to the 2 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 1 mg/mL
- Doses per vial
- 1
- Weeks (1 dose/wk)
- 1
150 units (1.5 mL) on a 1 mL U-100 syringe: 1.5 mg from a 2 mg vial + 2 mL water (Tesamorelin).
Dosing table for a 2 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 0.5 mg | 25 | 50 | 62.5 | 75 |
| 1 mg | 50 | 100 | 125 | 150 |
| 1.5 mg | 75 | 150 | 187.5 | 225 |
| 2 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
1.5 mg ÷ 1 mg/mL = 1.5 mL
1.5 mL × 100 = 150 units
Where the doses for a 2 mg tesamorelin vial come from
The Egrifta SV label gives 1.4 mg, which is 0.35 mL of its reconstituted solution, once daily.[3]
A 12-week dose-ranging trial of tesamorelin (then called TH9507) gave 1 mg and 2 mg subcutaneously once daily.[4]
What a 2 mg vial gives
2 mg tesamorelin vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 2 doses = 2 days -> 50 / 100 / 150 (>100, over one 1 mL syringe) units; 1.28 mg -> 1 dose = 1 day, 0.72 mg left -> 64 / 128 (>100, over one 1 mL syringe) / 192 (>100, over one 1 mL syringe) units; 1.4 mg -> 1 dose = 1 day, 0.6 mg left -> 70 / 140 (>100, over one 1 mL syringe) / 210 (>100, over one 1 mL syringe) units; 2 mg -> 1 dose = 1 day -> 100 / 200 (>100, over one 1 mL syringe) / 300 (>100, over one 1 mL syringe) units.
Calculated from vial mg 2; doses mg 1, 1.28, 1.4, 2; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
Is 2 mg a labelled tesamorelin strength?
Comparing a 2 mg tesamorelin vial with the quoted Egrifta SV and Egrifta WR vial strengths: 2 mg equals a labelled strength.
Calculated from vial mg 2; labelled strengths mg 2, 11.6. Formula: compare vialMg with each labelled strength in mg
Common questions
How much water goes in a 2 mg vial of Tesamorelin?
That choice only changes the concentration. With 2 mL, a 2 mg vial is 1 mg/mL; with 1 mL it is 2 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 1 mg from a 2 mg vial?
With 2 mL of water, 1 mg is 100 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 2 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How much bacteriostatic water goes into a 2 mg tesamorelin vial?
For tesamorelin, the water volume only changes the concentration: 2 mg in 1, 2 or 3 mL is 2, 1 or 0.67 mg/mL.
Calculated from vial mg 2; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl
How do you reconstitute a 2 mg tesamorelin vial?
With 2 mL of water the 2 mg tesamorelin vial is 1 mg/mL, so each 0.01 mL unit holds 10 mcg.
Calculated from vial mg 2; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10
What do trials and labels say about doses for a 2 mg tesamorelin vial?
The tesamorelin doses on this page come from trials and labels (1, 1.28, 1.4, 2 mg), and the 2 mg vial table above shows how each divides; it is not a recommendation.
Calculated from vial mg 2; doses mg 1, 1.28, 1.4, 2. Formula: see vial table
More on Tesamorelin
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3EGRIFTA SV prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
- 4A placebo-controlled, dose-ranging study of a growth hormone releasing factor in HIV-infected patients with abdominal fat accumulation.AIDS (London, England) · 2005PMID 16052083Accessed 2 Oct 2026
Found an error? Report a correction.