BPC-157 reconstitution calculator
- Concentration
- 2.5 mg/mL
- Doses per vial
- 20
- Weeks (1 dose/wk)
- 20
10 units (0.1 mL) on a 1 mL U-100 syringe: 250 mcg from a 5 mg vial + 2 mL water (BPC-157).
Dosing table for a 5 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 100 mcg | 2 | 4 | 5 | 6 |
| 200 mcg | 4 | 8 | 10 | 12 |
| 250 mcg | 5 | 10 | 12.5 | 15 |
| 300 mcg | 6 | 12 | 15 | 18 |
| 400 mcg | 8 | 16 | 20 | 24 |
| 500 mcg | 10 | 20 | 25 | 30 |
| 750 mcg | 15 | 30 | 37.5 | 45 |
| 1000 mcg | 20 | 40 | 50 | 60 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
250 mcg = 0.25 mg; 0.25 mg ÷ 2.5 mg/mL = 0.1 mL
0.1 mL × 100 = 10 units
How many units is 250 mcg of BPC-157?
With a 5 mg vial and 2 mL of bacteriostatic water, 250 mcg is 10 units (0.10 mL) on a U-100 syringe. With 1 mL of water it is 5 units. The answer always depends on how much water was added.
How much bacteriostatic water for a 5 mg BPC-157 vial?
The water only sets the concentration; the amount of BPC-157 in the vial stays the same. 2 mL makes 2.5 mg/mL, so 250 mcg is 10 units. 2.5 mL makes 2 mg/mL, so the same 250 mcg is 12.5 units. More water makes small doses easier to measure but needs more volume per injection.
How many 250 mcg doses are in a 5 mg vial?
5 mg is 5,000 mcg; 5,000 ÷ 250 = 20, so 20 full doses of 250 mcg. Any liquid lost in the needle and vial is not counted.
How much bac water for 10mg BPC-157?
Any volume works; it sets the strength. 1 mL gives 10 mg/mL, 2 mL gives 5 mg/mL and 5 mL gives 2 mg/mL. With 2 mL each unit is 0.05 mg, or 50 mcg.
Calculated from vial mg 10; water m L 1, 2, 5. Formula: 10/1 = 10; 10/2 = 5; 10/5 = 2 mg/mL; 5 mg/mL x 0.01 mL = 0.05 mg
What does BPC-157 10mg dosage mean on a vial?
A 10 mg label states the powder in the vial, not an intended amount; the human amount in the bladder pilot happened to be a total of 10 mg, once, around the inflamed area.[3]
Is there a BPC-157 reconstitution instruction from a regulator?
No regulator-approved BPC-157 product exists, so there is no label instruction; the human infusion report diluted in saline rather than reconstituting a vial.[4]
Preset doses are round numbers for the arithmetic, not dosing guidance. Vial sizes are the ones most often mentioned for BPC-157 in community discussions.
The only human amounts on record are milligram-scale
In the bladder pilot, women received a total of 10 mg of BPC-157 as injections around the inflamed area during a single cystoscopy.[3]
In an intravenous safety report in healthy adults, 10 mg was infused on day 1, diluted in 250 cc of normal saline over one hour.[4]
On day 2 of that report the amount was doubled, with 20 mg again diluted in 250 cc of saline and infused over one hour.[4]
That infusion is a dilution of 10 mg in 250 mL, or 0.04 mg/mL. A 5 mg vial mixed with 2 mL is 2.5 mg/mL, which is 62.5 times stronger, so the infusion cannot be reproduced or checked with a syringe-unit calculation.
Calculated from infusion mg 10; infusion m L 250; vial mg 5; water m L 2. Formula: 10 / 250 = 0.04 mg/mL; 5 / 2 = 2.5 mg/mL; 2.5 / 0.04 = 62.5
The bladder amount, 10 mg, equals a whole 10 mg vial. Mixed with 2 mL it is 5 mg/mL and the amount is 2 mL, or 200 units, 2 times what a 1 mL U-100 syringe holds.
Calculated from dose mg 10; vial mg 10; water m L 2. Formula: 10 / 10 = 1 vial; 10 / 2 = 5 mg/mL; 10 / 5 = 2 mL = 200 units
Animal doses are per kilogram, which is why they do not convert
A rat tendon experiment gave BPC-157 at 10 µg/kg per day, a dose stated per kilogram of body weight.[5]
The same animals each weighed about 330 g.[5]
A rabbit bone-defect experiment went far lower, using 10 ng/kg injected into muscle; this was an animal result.[6]
For a 330 g rat, 10 µg/kg is 3.3 µg. Out of a 5 mg vial mixed with 2 mL (2,500 µg/mL) that is 0.00132 mL, or 0.13 of a unit. The 10 ng/kg arms come to 3.3 ng, which is 0.00013 units: below anything a syringe can draw.
Calculated from rat kg 0.33; dose µg per kg 10; vial mg 5; water m L 2. Formula: 0.33 x 10 = 3.3 ug; 3.3 / 2500 = 0.00132 mL; x 100 = 0.13 units
Micrograms, milligrams and the 1,000 factor
The calculator works in mcg, but the human reports are in mg. 1 mg is 1,000 mcg, so a 10 mg amount is 10,000 mcg and a 5 mg vial holds 5,000 mcg.
Calculated from mg 10; mcg per mg 1000. Formula: 10 x 1000 = 10,000 mcg
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Effect of BPC-157 on Symptoms in Patients with Interstitial Cystitis: A Pilot Study.Alternative therapies in health and medicine · 2024PMID 39325560Accessed 2 Oct 2026
- 4Safety of Intravenous Infusion of BPC157 in Humans: A Pilot Study.Alternative therapies in health and medicine · 2025PMID 40131143Accessed 2 Oct 2026
- 5Effects of BPC-157 and TB-500 on Achilles tendon healing in rats: A histopathological and biomechanical study.Joint diseases and related surgery · 2026PMID 42542926Accessed 2 Oct 2026
- 6Osteogenic effect of a gastric pentadecapeptide, BPC-157, on the healing of segmental bone defect in rabbits: a comparison with bone marrow and autologous cortical bone implantation.Bone · 1999PMID 10071911Accessed 2 Oct 2026
Found an error? Report a correction.