Skip to content
Peptigraph home

10 mg Sermorelin in Units: Syringe Chart

How many syringe units 10 mg of Sermorelin is, for every common vial size and water volume, with the math shown.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureGHRH analogUpdated
Amount
10 mg
At 5 mg/mL
200 units
e.g. 10 mg vial + 2 mL
At 10 mg/mL
100 units
e.g. 20 mg vial + 2 mL
Syringe
U-100
100 units = 1 mL

10 mg in units at common mixes

Units on a U-100 syringe (100 units = 1 mL) for a 10 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.

10 mg of Sermorelin in syringe units
VialWaterConcentrationUnits for 10 mgVolume
15 mg1 mL15 mg/mL66.7 u0.67 mL
15 mg2 mL7.5 mg/mL133.3 u (over 1 mL)1.33 mL
15 mg3 mL5 mg/mL200 u (over 1 mL)2.00 mL

Calculator and full dosing table

Preset to 10 mg in a 15 mg vial. Change any value; the table below the result updates with it.

1Vial size
2Bacteriostatic water added
3Dose per injection
4Syringe (U-100)
Draw to
133.33units
= 1.33 mL on a 1 mL U-100 insulin syringe
15 mg vial2 mL water10 mg dose
Concentration
7.5 mg/mL
Doses per vial
1
Weeks (1 dose/wk)
1
Math only. It does not recommend a dose.

133.33 units (1.33 mL) on a 1 mL U-100 syringe: 10 mg from a 15 mg vial + 2 mL water (Sermorelin).

Dosing table for a 15 mg vial

Syringe units (U-100) for each dose, by how much bacteriostatic water you add.

Sermorelin: U-100 syringe units per dose for a 15 mg vial
Dose1 mL water2 mL water2.5 mL water3 mL water
10 mg66.67133.33166.67200

How the math works

Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.

15 mg ÷ 2 mL = 7.5 mg/mL
10 mg ÷ 7.5 mg/mL = 1.33 mL
1.33 mL × 100 = 133.33 units
133.33 units · 1.33 mL · 10 mg from 15 mg + 2 mL
Math only. The amounts in these tables are reference values for the arithmetic, not dose recommendations.

Where the doses for a 10 mg sermorelin vial come from

Older men in a crossover study injected the GHRH 1-29 fragment at 0.5 mg twice daily for 14 days per dose.[3]

A 6-week open study used 2 mg of GHRH nightly by self-injection.[4]

What a 10 mg vial gives

10 mg sermorelin vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 0.5 mg -> 20 doses = 10 days -> 5 / 10 / 15 units; 1 mg -> 10 doses = 5 days -> 10 / 20 / 30 units; 2 mg -> 5 doses = 5 days -> 20 / 40 / 60 units.

Calculated from vial mg 10; doses mg 0.5, 1, 2; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1 2, 2 1, 0.5 2. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100

Is 10 mg a labelled sermorelin strength?

Drugs@FDA lists sermorelin only as Geref, which came as a 0.5 mg vial.[5]

Geref also came as a 1 mg vial.[5]

Every Geref entry in that search carries the status Discontinued.[5]

Comparing a 10 mg sermorelin vial with the quoted Geref vial strengths (all discontinued): 10 mg is above the largest labelled strength of 1 mg.

Calculated from vial mg 10; labelled strengths mg 0.5, 1. Formula: compare vialMg with each labelled strength in mg

Common questions

How many units is 10 mg of Sermorelin?

It depends on the concentration. With a 5 mg vial and 2 mL of water (2.5 mg/mL), 10 mg is 400 units on a U-100 syringe. The table shows other mixes.

Is 10 mg a recommended dose of Sermorelin?

This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.

How much bacteriostatic water goes into a 10 mg sermorelin vial?

For sermorelin, the water volume only changes the concentration: 10 mg in 1, 2 or 3 mL is 10, 5 or 3.33 mg/mL.

Calculated from vial mg 10; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl

How do you reconstitute a 10 mg sermorelin vial?

With 2 mL of water the 10 mg sermorelin vial is 5 mg/mL, so each 0.01 mL unit holds 50 mcg.

Calculated from vial mg 10; water mL 2. Formula: mcg per unit = vialMg / waterMl x 10

What do trials and labels say about doses for a 10 mg sermorelin vial?

The sermorelin doses on this page come from trials and labels (0.5, 1, 2 mg), and the 10 mg vial table above shows how each divides; it is not a recommendation.

Calculated from vial mg 10; doses mg 0.5, 1, 2. Formula: see vial table

More on Sermorelin

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3Growth hormone (GH)-releasing hormone-(1-29) twice daily reverses the decreased GH and insulin-like growth factor-I levels in old men.The Journal of clinical endocrinology and metabolism · 1992PMID 1379256Accessed 2 Oct 2026
  4. 4Effects of single nightly injections of growth hormone-releasing hormone (GHRH 1-29) in healthy elderly men.Metabolism: clinical and experimental · 1997PMID 9005976Accessed 2 Oct 2026
  5. 5Drugs@FDA (openFDA) search: active ingredient "sermorelin"U.S. Food and Drug Administration · 2026api.fda.govAccessed 2 Oct 2026

Found an error? Report a correction.