2 mg Tirzepatide in Units: Syringe Chart
How many syringe units 2 mg of Tirzepatide is, for every common vial size and water volume, with the math shown.
- Amount
- 2 mg
- At 5 mg/mL
- 40 units
- e.g. 10 mg vial + 2 mL
- At 10 mg/mL
- 20 units
- e.g. 20 mg vial + 2 mL
- Syringe
- U-100
- 100 units = 1 mL
2 mg in units at common mixes
Units on a U-100 syringe (100 units = 1 mL) for a 2 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.
| Vial | Water | Concentration | Units for 2 mg | Volume |
|---|---|---|---|---|
| 5 mg | 1 mL | 5 mg/mL | 40 u | 0.40 mL |
| 5 mg | 2 mL | 2.5 mg/mL | 80 u | 0.80 mL |
| 5 mg | 3 mL | 1.667 mg/mL | 120 u (over 1 mL) | 1.20 mL |
| 10 mg | 1 mL | 10 mg/mL | 20 u | 0.20 mL |
| 10 mg | 2 mL | 5 mg/mL | 40 u | 0.40 mL |
| 10 mg | 3 mL | 3.333 mg/mL | 60 u | 0.60 mL |
| 15 mg | 1 mL | 15 mg/mL | 13.3 u | 0.13 mL |
| 15 mg | 2 mL | 7.5 mg/mL | 26.7 u | 0.27 mL |
| 15 mg | 3 mL | 5 mg/mL | 40 u | 0.40 mL |
| 20 mg | 1 mL | 20 mg/mL | 10 u | 0.10 mL |
| 20 mg | 2 mL | 10 mg/mL | 20 u | 0.20 mL |
| 20 mg | 3 mL | 6.667 mg/mL | 30 u | 0.30 mL |
| 30 mg | 1 mL | 30 mg/mL | 6.7 u | 0.07 mL |
| 30 mg | 2 mL | 15 mg/mL | 13.3 u | 0.13 mL |
| 30 mg | 3 mL | 10 mg/mL | 20 u | 0.20 mL |
| 40 mg | 1 mL | 40 mg/mL | 5 u | 0.05 mL |
| 40 mg | 2 mL | 20 mg/mL | 10 u | 0.10 mL |
| 40 mg | 3 mL | 13.333 mg/mL | 15 u | 0.15 mL |
Calculator and full dosing table
Preset to 2 mg in a 10 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 5 mg/mL
- Doses per vial
- 5
- Weeks (1 dose/wk)
- 5
40 units (0.4 mL) on a 1 mL U-100 syringe: 2 mg from a 10 mg vial + 2 mL water (Tirzepatide).
Dosing table for a 10 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 1 mg | 10 | 20 | 25 | 30 |
| 2 mg | 20 | 40 | 50 | 60 |
| 2.5 mg | 25 | 50 | 62.5 | 75 |
| 5 mg | 50 | 100 | 125 | 150 |
| 7.5 mg | 75 | 150 | 187.5 | 225 |
| 10 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
2 mg ÷ 5 mg/mL = 0.4 mL
0.4 mL × 100 = 40 units
Where the doses for a 2 mg tirzepatide vial come from
The 72-week obesity trial tested once-weekly subcutaneous tirzepatide at 5 mg, 10 mg and 15 mg against placebo.[3]
The 26-week phase 2 diabetes trial tested once-weekly tirzepatide at 1, 5, 10 and 15 mg against dulaglutide 1.5 mg and placebo.[4]
What a 2 mg vial gives
2 mg tirzepatide vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 2 doses = 2 weeks -> 50 / 100 / 150 (>100, over one 1 mL syringe) units. For tirzepatide, 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg and 15 mg are larger than the whole 2 mg vial.
Calculated from vial mg 2; doses mg 1, 2.5, 5, 7.5, 10, 12.5, 15; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
Is 2 mg a labelled tirzepatide strength?
The Mounjaro label lists single-dose pens and vials at 2.5, 5, 7.5, 10, 12.5 and 15 mg per 0.5 mL.[5]
Comparing a 2 mg tirzepatide vial with the quoted single-dose strengths in the Mounjaro label: 2 mg is below the smallest labelled strength of 2.5 mg.
Calculated from vial mg 2; labelled strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: compare vialMg with each labelled strength in mg
Four-dose labelled vials total 10, 20, 30, 40, 50, 60 mg, and 2 mg is not one of them.
Calculated from vial mg 2; doses per vial 4; dose strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: total = 4 x dose strength
Common questions
How many units is 2 mg of Tirzepatide?
It depends on the concentration. With a 10 mg vial and 2 mL of water (5 mg/mL), 2 mg is 40 units on a U-100 syringe. The table shows other mixes.
Is 2 mg a recommended dose of Tirzepatide?
This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.
How many micrograms are in one unit of a 2 mg tirzepatide vial?
In a 2 mg tirzepatide vial, one U-100 unit holds 20 mcg at 1 mL, 10 mcg at 2 mL and 6.67 mcg at 3 mL.
Calculated from vial mg 2; water mL 1, 2, 3. Formula: mcg per unit = vialMg / waterMl x 10
More on Tirzepatide
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Tirzepatide Once Weekly for the Treatment of Obesity.The New England journal of medicine · 2022PMID 35658024Accessed 2 Oct 2026
- 4Effects of Novel Dual GIP and GLP-1 Receptor Agonist Tirzepatide on Biomarkers of Nonalcoholic Steatohepatitis in Patients With Type 2 Diabetes.Diabetes care · 2020PMID 32291277Accessed 2 Oct 2026
- 5MOUNJARO prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
Found an error? Report a correction.