Tirzepatide 5 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 5 mg vial of Tirzepatide, the concentration you get, and a full dose-to-units chart.
- Vial size
- 5 mg
- With 2 mL water
- 2.5 mg/mL
- common choice
- 10 units contain
- 0.25 mg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of Tirzepatide in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 1 mg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 5 mg/mL | 0.5 mg | 20 u | 100 u |
| 2 mL | 2.5 mg/mL | 0.25 mg | 40 u | 200 u |
| 2.5 mL | 2 mg/mL | 0.2 mg | 50 u | 250 u |
| 3 mL | 1.667 mg/mL | 0.167 mg | 60 u | 300 u |
Calculator and full dosing table
Preset to the 5 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 2.5 mg/mL
- Doses per vial
- 1
- Weeks (1 dose/wk)
- 1
200 units (2 mL) on a 1 mL U-100 syringe: 5 mg from a 5 mg vial + 2 mL water (Tirzepatide).
Dosing table for a 5 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 1 mg | 20 | 40 | 50 | 60 |
| 2.5 mg | 50 | 100 | 125 | 150 |
| 5 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
5 mg ÷ 2.5 mg/mL = 2 mL
2 mL × 100 = 200 units
Where the doses behind the 5 mg vial maths come from
5 mg is the label's second weekly dosage, reached after 4 weeks.[3]
5 mg: weekly doses and syringe units
5 mg tirzepatide vial at 1 / 2 / 3 mL of water (5 / 2.5 / 1.67 mg/mL), per sourced dose, with doses per vial and units at 1 / 2 / 3 mL: 2.5 mg: 2 weekly doses, no remainder; 50 / 100 / 150‡ units. 5 mg: 1 weekly dose, no remainder; 100 / 200‡ / 300‡ units. 10 mg: the vial holds 0.5 of one dose. 15 mg: the vial holds 0.33 of one dose. († marks a 5 mg tirzepatide reading under 5 units, hard to measure accurately; ‡ marks one over the 100 units a 1 mL U-100 syringe holds.)
Calculated from vial mg 5; water mL 1, 2, 3; units per mL 100; doses mg 2.5, 5, 10, 15; rows dose mg 2.5, doses 2, remainder mg 0, units 50, 100, 150; dose mg 5, doses 1, remainder mg 0, units 100, 200, 300. Formula: doses = floor(vialMg / doseMg); units = doseMg x waterMl / vialMg x 100
Measuring check for the 5 mg vial: 1 mL (5 mg/mL) spans 50 to 100 units, all within 5 to 100; 2 mL (2.5 mg/mL) spans 100 to 200 units, some over 100 units; 3 mL (1.67 mg/mL) spans 150 to 300 units, some over 100 units. For tirzepatide at 5 mg, every sourced dose is readable between 5 and 100 units at 1 mL.
Calculated from vial mg 5; doses mg 2.5, 5; readable range units 5, 100. Formula: units = doseMg x waterMl / vialMg x 100, checked against 5 and 100
Is 5 mg a labelled tirzepatide strength?
Single-dose pens and vials are labelled at 5 mg/0.5 mL, a one-injection presentation.[3]
The labelled 5 mg/0.5 mL product is 10 mg/mL, so the full 5 mg sits in a 50-unit volume.
Calculated from dose mg 5; volume mL 0.5; units per mL 100. Formula: 5 / 0.5 = 10 mg/mL; 0.5 x 100 = 50 units
The smallest labelled multi-dose vial is 10 mg/2.4 mL (2.5 mg/0.6 mL doses), so no multi-dose Zepbound vial matches a 5 mg total.[3]
Listed price for 5 mg
The price dataset has 17 single-vial listings at 5 mg with a median of $70.00, which works out to $14.00 per mg; listings ranged from $36.00 to $149.99 when checked on 2026-10-02.
Calculated from source our price listings dataset; vial mg 5; listings 17; median 70; min 36; max 149.99; checked 2026-10-02. Formula: median / vialMg = 70.0 / 5 = 14.00 per mg
Common questions
How much water goes in a 5 mg vial of Tirzepatide?
That choice only changes the concentration. With 2 mL, a 5 mg vial is 2.5 mg/mL; with 1 mL it is 5 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 1 mg from a 5 mg vial?
With 2 mL of water, 1 mg is 40 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 5 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How much bacteriostatic water for a 5 mg tirzepatide vial?
The water volume only sets the strength: 5 mg of tirzepatide in 1, 2 or 3 mL is 5, 2.5 or 1.67 mg/mL, which is 50, 25 or 17 mcg per syringe unit.
Calculated from vial mg 5; water mL 1, 2, 3; units per mL 100. Formula: mg/mL = 5 / mL; mg per unit = (mg/mL) / 100
What is the tirzepatide 5mg dosage?
On the Zepbound label, 5 mg is the second weekly dosage, reached after 4 weeks at the starting dosage.[3]
More on Tirzepatide
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3ZEPBOUND prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
Found an error? Report a correction.