3 mg Tirzepatide in Units: Syringe Chart
How many syringe units 3 mg of Tirzepatide is, for every common vial size and water volume, with the math shown.
- Amount
- 3 mg
- At 5 mg/mL
- 60 units
- e.g. 10 mg vial + 2 mL
- At 10 mg/mL
- 30 units
- e.g. 20 mg vial + 2 mL
- Syringe
- U-100
- 100 units = 1 mL
3 mg in units at common mixes
Units on a U-100 syringe (100 units = 1 mL) for a 3 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.
| Vial | Water | Concentration | Units for 3 mg | Volume |
|---|---|---|---|---|
| 5 mg | 1 mL | 5 mg/mL | 60 u | 0.60 mL |
| 5 mg | 2 mL | 2.5 mg/mL | 120 u (over 1 mL) | 1.20 mL |
| 5 mg | 3 mL | 1.667 mg/mL | 180 u (over 1 mL) | 1.80 mL |
| 10 mg | 1 mL | 10 mg/mL | 30 u | 0.30 mL |
| 10 mg | 2 mL | 5 mg/mL | 60 u | 0.60 mL |
| 10 mg | 3 mL | 3.333 mg/mL | 90 u | 0.90 mL |
| 15 mg | 1 mL | 15 mg/mL | 20 u | 0.20 mL |
| 15 mg | 2 mL | 7.5 mg/mL | 40 u | 0.40 mL |
| 15 mg | 3 mL | 5 mg/mL | 60 u | 0.60 mL |
| 20 mg | 1 mL | 20 mg/mL | 15 u | 0.15 mL |
| 20 mg | 2 mL | 10 mg/mL | 30 u | 0.30 mL |
| 20 mg | 3 mL | 6.667 mg/mL | 45 u | 0.45 mL |
| 30 mg | 1 mL | 30 mg/mL | 10 u | 0.10 mL |
| 30 mg | 2 mL | 15 mg/mL | 20 u | 0.20 mL |
| 30 mg | 3 mL | 10 mg/mL | 30 u | 0.30 mL |
| 40 mg | 1 mL | 40 mg/mL | 7.5 u | 0.08 mL |
| 40 mg | 2 mL | 20 mg/mL | 15 u | 0.15 mL |
| 40 mg | 3 mL | 13.333 mg/mL | 22.5 u | 0.23 mL |
Calculator and full dosing table
Preset to 3 mg in a 10 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 5 mg/mL
- Doses per vial
- 3
- Weeks (1 dose/wk)
- 3
60 units (0.6 mL) on a 1 mL U-100 syringe: 3 mg from a 10 mg vial + 2 mL water (Tirzepatide).
Dosing table for a 10 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 1 mg | 10 | 20 | 25 | 30 |
| 2.5 mg | 25 | 50 | 62.5 | 75 |
| 3 mg | 30 | 60 | 75 | 90 |
| 5 mg | 50 | 100 | 125 | 150 |
| 7.5 mg | 75 | 150 | 187.5 | 225 |
| 10 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
3 mg ÷ 5 mg/mL = 0.6 mL
0.6 mL × 100 = 60 units
Where the doses for a 3 mg tirzepatide vial come from
In the 72-week obesity trial, once-weekly subcutaneous tirzepatide arms included 5 mg and 10 mg.[3]
The 26-week phase 2 diabetes trial in the evidence file ran once-weekly tirzepatide arms at 15 mg.[4]
What a 3 mg vial gives
3 mg tirzepatide vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 3 doses = 3 weeks -> 33.33 / 66.67 / 100 units; 2.5 mg -> 1 dose = 1 week, 0.5 mg left -> 83.33 / 166.67 (>100, over one 1 mL syringe) / 250 (>100, over one 1 mL syringe) units. For tirzepatide, 5 mg, 7.5 mg, 10 mg, 12.5 mg and 15 mg are larger than the whole 3 mg vial.
Calculated from vial mg 3; doses mg 1, 2.5, 5, 7.5, 10, 12.5, 15; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
Is 3 mg a labelled tirzepatide strength?
The Mounjaro label lists single-dose pens and vials at 10 mg/0.5 mL among its strengths.[5]
Comparing a 3 mg tirzepatide vial with the quoted single-dose strengths in the Mounjaro label: 3 mg falls between the labelled 2.5 mg and 5 mg.
Calculated from vial mg 3; labelled strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: compare vialMg with each labelled strength in mg
Four-dose labelled vials total 10, 20, 30, 40, 50, 60 mg, and 3 mg is not one of them.
Calculated from vial mg 3; doses per vial 4; dose strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: total = 4 x dose strength
Common questions
How many units is 3 mg of Tirzepatide?
It depends on the concentration. With a 10 mg vial and 2 mL of water (5 mg/mL), 3 mg is 60 units on a U-100 syringe. The table shows other mixes.
Is 3 mg a recommended dose of Tirzepatide?
This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.
How many micrograms are in one unit of a 3 mg tirzepatide vial?
In a 3 mg tirzepatide vial, one U-100 unit holds 30 mcg at 1 mL, 15 mcg at 2 mL and 10 mcg at 3 mL.
Calculated from vial mg 3; water mL 1, 2, 3. Formula: mcg per unit = vialMg / waterMl x 10
More on Tirzepatide
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Tirzepatide Once Weekly for the Treatment of Obesity.The New England journal of medicine · 2022PMID 35658024Accessed 2 Oct 2026
- 4Effects of Novel Dual GIP and GLP-1 Receptor Agonist Tirzepatide on Biomarkers of Nonalcoholic Steatohepatitis in Patients With Type 2 Diabetes.Diabetes care · 2020PMID 32291277Accessed 2 Oct 2026
- 5MOUNJARO prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
Found an error? Report a correction.