7.5 mg Tirzepatide in Units: Syringe Chart
How many syringe units 7.5 mg of Tirzepatide is, for every common vial size and water volume, with the math shown.
- Amount
- 7.5 mg
- At 5 mg/mL
- 150 units
- e.g. 10 mg vial + 2 mL
- At 10 mg/mL
- 75 units
- e.g. 20 mg vial + 2 mL
- Syringe
- U-100
- 100 units = 1 mL
7.5 mg in units at common mixes
Units on a U-100 syringe (100 units = 1 mL) for a 7.5 mg amount, by vial size and water added. Concentration = vial mg ÷ mL of water; units = dose ÷ concentration × 100.
| Vial | Water | Concentration | Units for 7.5 mg | Volume |
|---|---|---|---|---|
| 10 mg | 1 mL | 10 mg/mL | 75 u | 0.75 mL |
| 10 mg | 2 mL | 5 mg/mL | 150 u (over 1 mL) | 1.50 mL |
| 10 mg | 3 mL | 3.333 mg/mL | 225 u (over 1 mL) | 2.25 mL |
| 15 mg | 1 mL | 15 mg/mL | 50 u | 0.50 mL |
| 15 mg | 2 mL | 7.5 mg/mL | 100 u | 1.00 mL |
| 15 mg | 3 mL | 5 mg/mL | 150 u (over 1 mL) | 1.50 mL |
| 20 mg | 1 mL | 20 mg/mL | 37.5 u | 0.38 mL |
| 20 mg | 2 mL | 10 mg/mL | 75 u | 0.75 mL |
| 20 mg | 3 mL | 6.667 mg/mL | 112.5 u (over 1 mL) | 1.13 mL |
| 30 mg | 1 mL | 30 mg/mL | 25 u | 0.25 mL |
| 30 mg | 2 mL | 15 mg/mL | 50 u | 0.50 mL |
| 30 mg | 3 mL | 10 mg/mL | 75 u | 0.75 mL |
| 40 mg | 1 mL | 40 mg/mL | 18.8 u | 0.19 mL |
| 40 mg | 2 mL | 20 mg/mL | 37.5 u | 0.38 mL |
| 40 mg | 3 mL | 13.333 mg/mL | 56.3 u | 0.56 mL |
| 50 mg | 1 mL | 50 mg/mL | 15 u | 0.15 mL |
| 50 mg | 2 mL | 25 mg/mL | 30 u | 0.30 mL |
| 50 mg | 3 mL | 16.667 mg/mL | 45 u | 0.45 mL |
Calculator and full dosing table
Preset to 7.5 mg in a 10 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 5 mg/mL
- Doses per vial
- 1
- Weeks (1 dose/wk)
- 1
150 units (1.5 mL) on a 1 mL U-100 syringe: 7.5 mg from a 10 mg vial + 2 mL water (Tirzepatide).
Dosing table for a 10 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 1 mg | 10 | 20 | 25 | 30 |
| 2.5 mg | 25 | 50 | 62.5 | 75 |
| 5 mg | 50 | 100 | 125 | 150 |
| 7.5 mg | 75 | 150 | 187.5 | 225 |
| 10 mg | 100 | 200 | 250 | 300 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
7.5 mg ÷ 5 mg/mL = 1.5 mL
1.5 mL × 100 = 150 units
Where the doses for a 7.5 mg tirzepatide vial come from
The 26-week phase 2 diabetes trial in the evidence file ran once-weekly tirzepatide arms at 1 mg and 10 mg.[3]
In the 72-week obesity trial, once-weekly subcutaneous tirzepatide arms included 10 mg and 15 mg.[4]
What a 7.5 mg vial gives
7.5 mg tirzepatide vial (dose -> supply -> units at 1 / 2 / 3 mL of water): 1 mg -> 7 doses = 7 weeks, 0.5 mg left -> 13.33 / 26.67 / 40 units; 2.5 mg -> 3 doses = 3 weeks -> 33.33 / 66.67 / 100 units; 5 mg -> 1 dose = 1 week, 2.5 mg left -> 66.67 / 133.33 (>100, over one 1 mL syringe) / 200 (>100, over one 1 mL syringe) units; 7.5 mg -> 1 dose = 1 week -> 100 / 200 (>100, over one 1 mL syringe) / 300 (>100, over one 1 mL syringe) units. For tirzepatide, 10 mg, 12.5 mg and 15 mg are larger than the whole 7.5 mg vial.
Calculated from vial mg 7.5; doses mg 1, 2.5, 5, 7.5, 10, 12.5, 15; dose sources quoted trial arms and label dosing on this page; water mL 1, 2, 3; u100 units per mL 100; injections per day 1. Formula: full doses = floor(vialMg / doseMg); units = doseMg / (vialMg / waterMl) x 100; flag units < 5 or > 100
Is 7.5 mg a labelled tirzepatide strength?
The Mounjaro label lists single-dose pens and vials at 5 mg/0.5 mL and 7.5 mg/0.5 mL among its strengths.[5]
Comparing a 7.5 mg tirzepatide vial with the quoted single-dose strengths in the Mounjaro label: 7.5 mg equals a labelled strength.
Calculated from vial mg 7.5; labelled strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: compare vialMg with each labelled strength in mg
Four-dose labelled vials total 10, 20, 30, 40, 50, 60 mg, and 7.5 mg is not one of them.
Calculated from vial mg 7.5; doses per vial 4; dose strengths mg 2.5, 5, 7.5, 10, 12.5, 15. Formula: total = 4 x dose strength
Common questions
How many units is 7.5 mg of Tirzepatide?
It depends on the concentration. With a 10 mg vial and 2 mL of water (5 mg/mL), 7.5 mg is 150 units on a U-100 syringe. The table shows other mixes.
Is 7.5 mg a recommended dose of Tirzepatide?
This page is math only. It converts an amount into syringe units and does not recommend a dose. See the dosage page for what studies used.
How much bacteriostatic water goes into a 7.5 mg tirzepatide vial?
For tirzepatide, the water volume only changes the concentration: 7.5 mg in 1, 2 or 3 mL is 7.5, 3.75 or 2.5 mg/mL.
Calculated from vial mg 7.5; water mL 1, 2, 3. Formula: mg/mL = vialMg / waterMl
More on Tirzepatide
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Effects of Novel Dual GIP and GLP-1 Receptor Agonist Tirzepatide on Biomarkers of Nonalcoholic Steatohepatitis in Patients With Type 2 Diabetes.Diabetes care · 2020PMID 32291277Accessed 2 Oct 2026
- 4Tirzepatide Once Weekly for the Treatment of Obesity.The New England journal of medicine · 2022PMID 35658024Accessed 2 Oct 2026
- 5MOUNJARO prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026
Found an error? Report a correction.