Skip to content
Peptigraph home

4 Units of Tirzepatide Is How Many mg?

It depends on the concentration. Here is what 4 units on a U-100 syringe holds at every common Tirzepatide mix, with the math.

Medical review pendingGLP-1 / GIP dual agonistUpdated
4 units
0.04 mL
U-100 syringe
At 5 mg/mL
0.2 mg
10 mg vial + 2 mL
At 10 mg/mL
0.4 mg
20 mg vial + 2 mL

The short answer

4 units on a U-100 insulin syringe is 0.04 mL. How many mg that holds depends on how concentrated the solution is: mg = mL × mg per mL. For example, 4 units of a 5 mg/mL solution is 0.2 mg.

4 units at each concentration

Concentrations you get from the vial sizes Tirzepatide is sold in, mixed with 1 to 3 mL of bacteriostatic water.

4 units of Tirzepatide in mg by concentration
ConcentrationExample mixmg in 4 units
1.667 mg/mL5 mg + 3 mL0.067 mg
2 mg/mL5 mg + 2.5 mL0.08 mg
2.5 mg/mL5 mg + 2 mL0.1 mg
3.333 mg/mL10 mg + 3 mL0.133 mg
4 mg/mL10 mg + 2.5 mL0.16 mg
5 mg/mL5 mg + 1 mL · 10 mg + 2 mL0.2 mg
6 mg/mL15 mg + 2.5 mL0.24 mg
6.667 mg/mL20 mg + 3 mL0.267 mg
7.5 mg/mL15 mg + 2 mL0.3 mg
8 mg/mL20 mg + 2.5 mL0.32 mg
10 mg/mL10 mg + 1 mL · 20 mg + 2 mL0.4 mg
12 mg/mL30 mg + 2.5 mL0.48 mg
13.333 mg/mL40 mg + 3 mL0.533 mg
15 mg/mL15 mg + 1 mL · 30 mg + 2 mL0.6 mg
16 mg/mL40 mg + 2.5 mL0.64 mg
16.667 mg/mL50 mg + 3 mL0.667 mg
20 mg/mL20 mg + 1 mL · 40 mg + 2 mL0.8 mg
24 mg/mL60 mg + 2.5 mL0.96 mg
25 mg/mL50 mg + 2 mL1 mg
30 mg/mL30 mg + 1 mL · 60 mg + 2 mL1.2 mg
40 mg/mL40 mg + 1 mL · 120 mg + 3 mL1.6 mg
Branded pens deliver preset doses and are not measured in syringe units. This math applies to solutions drawn from a vial with an insulin syringe.

How to work it out

1. Concentration = vial mg ÷ mL of water added (a 10 mg vial + 2 mL = 5 mg/mL). 2. Volume = units ÷ 100 (4 units = 0.04 mL). 3. mg = volume × concentration.

Work it out for your vial

4 units converted to mg

4 units is 0.04 mL on a U-100 syringe. Per vial mix: 10 mg in 1 mL (10 mg/mL) gives 0.4 mg; 10 mg in 2 mL (5 mg/mL) gives 0.2 mg; 10 mg in 3 mL (3.33 mg/mL) gives 0.133 mg; 30 mg in 1 mL (30 mg/mL) gives 1.2 mg; 30 mg in 2 mL (15 mg/mL) gives 0.6 mg; 30 mg in 3 mL (10 mg/mL) gives 0.4 mg; 50 mg in 1 mL (50 mg/mL) gives 2 mg; 50 mg in 2 mL (25 mg/mL) gives 1 mg; 50 mg in 3 mL (16.67 mg/mL) gives 0.667 mg.

Calculated from units 4; units per mL 100; vial mg 10, 30, 50; water mL 1, 2, 3. Formula: mL = units / 100; mg = units x (vialMg / waterMl) / 100

Reading backwards, 4 units of a 50 mg vial mixed with 2 mL (25 mg/mL) equals 1 mg.

Calculated from units 4; vial mg 50; water mL 2. Formula: mg = units x (vialMg / waterMl) / 100

Which studied dose 4 units equals

U-100 means 100 units in each mL, as an insulin label on the same scale spells out: 100 units/mL (U-100).[2]

Once-weekly tirzepatide at 1, 5, 10 or 15 mg was given over 26 weeks in a phase 2 diabetes trial, which makes 1 mg a studied arm.[3]

4 units from a 50 mg vial mixed with 2 mL is 1 mg, which equals the 1 mg arm of that trial only if the vial and water are exactly those values.

Calculated from units 4; vial mg 50; water mL 2; trial dose mg 1. Formula: mg = units x (vialMg / waterMl) / 100; compare with 1 mg

4 units against the label

Single-dose Mounjaro strengths run 2.5, 5, 7.5, 10, 12.5 and 15 mg in 0.5 mL, and the table above holds no labelled amount.[4]

For 4 units to equal the smallest labelled strength of 2.5 mg you would need a concentration of 62.5 mg/mL.

Calculated from units 4; labelled mg 2.5. Formula: required mg/mL = labelled mg / units x 100

Other unit amounts

Common questions

4 units of Tirzepatide is how many mg?

On a U-100 syringe, 4 units is 0.04 mL. Multiply by the concentration: at 5 mg/mL that is 0.2 mg; at 10 mg/mL it is 0.4 mg. Check the concentration on your vial or prescription label.

How many mL is 4 units?

0.04 mL. A U-100 insulin syringe holds 100 units per mL, so units ÷ 100 = mL.

Is 4 units of Tirzepatide a normal dose?

Units measure volume, not dose. The same number of units holds a different amount of drug at each concentration, which is why this page does not judge doses.

How many mg is 4 units of tirzepatide?

It depends on the mix: 4 units is 1 mg from 50 mg in 2 mL, or 0.4 mg from 10 mg in 1 mL.

Calculated from units 4; vial mg 50, 10; water mL 2, 1. Formula: mg = units x (vialMg / waterMl) / 100

More on Tirzepatide

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3Effects of Novel Dual GIP and GLP-1 Receptor Agonist Tirzepatide on Biomarkers of Nonalcoholic Steatohepatitis in Patients With Type 2 Diabetes.Diabetes care · 2020PMID 32291277Accessed 2 Oct 2026
  4. 4MOUNJARO prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.