Skip to content
Peptigraph home

75 Units of Tirzepatide Is How Many mg?

It depends on the concentration. Here is what 75 units on a U-100 syringe holds at every common Tirzepatide mix, with the math.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureGLP-1 / GIP dual agonistUpdated
75 units
0.75 mL
U-100 syringe
At 5 mg/mL
3.75 mg
10 mg vial + 2 mL
At 10 mg/mL
7.5 mg
20 mg vial + 2 mL

The short answer

75 units on a U-100 insulin syringe is 0.75 mL. How many mg that holds depends on how concentrated the solution is: mg = mL × mg per mL. For example, 75 units of a 5 mg/mL solution is 3.75 mg.

75 units at each concentration

Concentrations you get from the vial sizes Tirzepatide is sold in, mixed with 1 to 3 mL of bacteriostatic water.

75 units of Tirzepatide in mg by concentration
ConcentrationExample mixmg in 75 units
1.667 mg/mL5 mg + 3 mL1.25 mg
2 mg/mL5 mg + 2.5 mL1.5 mg
2.5 mg/mL5 mg + 2 mL1.875 mg
3.333 mg/mL10 mg + 3 mL2.5 mg
4 mg/mL10 mg + 2.5 mL3 mg
5 mg/mL5 mg + 1 mL · 10 mg + 2 mL3.75 mg
6 mg/mL15 mg + 2.5 mL4.5 mg
6.667 mg/mL20 mg + 3 mL5 mg
7.5 mg/mL15 mg + 2 mL5.625 mg
8 mg/mL20 mg + 2.5 mL6 mg
10 mg/mL10 mg + 1 mL · 20 mg + 2 mL7.5 mg
12 mg/mL30 mg + 2.5 mL9 mg
13.333 mg/mL40 mg + 3 mL10 mg
15 mg/mL15 mg + 1 mL · 30 mg + 2 mL11.25 mg
16 mg/mL40 mg + 2.5 mL12 mg
16.667 mg/mL50 mg + 3 mL12.5 mg
20 mg/mL20 mg + 1 mL · 40 mg + 2 mL15 mg
24 mg/mL60 mg + 2.5 mL18 mg
25 mg/mL50 mg + 2 mL18.75 mg
30 mg/mL30 mg + 1 mL · 60 mg + 2 mL22.5 mg
40 mg/mL40 mg + 1 mL · 120 mg + 3 mL30 mg
Branded pens deliver preset doses and are not measured in syringe units. This math applies to solutions drawn from a vial with an insulin syringe.

How to work it out

1. Concentration = vial mg ÷ mL of water added (a 10 mg vial + 2 mL = 5 mg/mL). 2. Volume = units ÷ 100 (75 units = 0.75 mL). 3. mg = volume × concentration.

Work it out for your vial

What 75 units means in milligrams

Drawn to 75 units (0.75 mL), the liquid holds: 2.5 mg/mL gives 1.875 mg; 5 mg/mL gives 3.75 mg; 10 mg/mL gives 7.5 mg; 15 mg/mL gives 11.25 mg; 20 mg/mL gives 15 mg.

Calculated from units 75; units per mL 100; concentrations mg per mL 2.5, 5, 10, 15, 20. Formula: mL = 75 / 100; mg = 75 x (mg/mL) / 100

Exact labelled amounts at this volume: 7.5 mg at 10 mg/mL, 15 mg at 20 mg/mL. Concentration required for a labelled amount at 75 units: 2.5 mg needs 3.33 mg/mL, 5 mg needs 6.67 mg/mL, 7.5 mg needs 10 mg/mL, 10 mg needs 13.33 mg/mL, 12.5 mg needs 16.67 mg/mL, 15 mg needs 20 mg/mL.

Calculated from units 75; labelled amounts mg 2.5, 5, 7.5, 10, 12.5, 15; concentrations mg per mL 2.5, 5, 10, 15, 20. Formula: required mg/mL = labelled mg / units x 100

How 75 units compares with labelled doses

The label notes that 2.5 mg is not approved as a maintenance dosage.[3]

The labelled multi-dose vials are drawn at 0.6 mL (60 units); 75 units is 125% of that draw, which at 4.17, 8.33, 12.5, 16.7, 20.8 and 25 mg/mL is 3.13, 6.25, 9.38, 12.53, 15.6, 18.75 mg.

Calculated from units 75; label conc mg per mL 4.17, 8.33, 12.5, 16.7, 20.8, 25; label draw mL 0.6. Formula: mg = 75 x (mg/mL) / 100 for each labelled concentration

No sampled concentration takes 75 units above the 15 mg label maximum; the highest is 15 mg.

Calculated from units 75; label max mg 15. Formula: max(mg) = 75 x 20 / 100

Other unit amounts

Common questions

75 units of Tirzepatide is how many mg?

On a U-100 syringe, 75 units is 0.75 mL. Multiply by the concentration: at 5 mg/mL that is 3.75 mg; at 10 mg/mL it is 7.5 mg. Check the concentration on your vial or prescription label.

How many mL is 75 units?

0.75 mL. A U-100 insulin syringe holds 100 units per mL, so units ÷ 100 = mL.

Is 75 units of Tirzepatide a normal dose?

Units measure volume, not dose. The same number of units holds a different amount of drug at each concentration, which is why this page does not judge doses.

How many mg is 75 units of tirzepatide?

It changes with the mix: 75 units equals 7.5 mg from 10 mg in 1 mL; 3.75 mg from 10 mg in 2 mL; 2.5 mg from 10 mg in 3 mL; 7.5 mg from 30 mg in 3 mL.

Calculated from units 75; mixes vial mg 10, water mL 1; vial mg 10, water mL 2; vial mg 10, water mL 3; vial mg 30, water mL 3. Formula: mg = 75 x (vialMg / waterMl) / 100

75 units tirzepatide: how much liquid is that?

75 units is 0.75 mL, because U-100 syringes are marked at 100 units per mL; a 1 mL syringe therefore holds 1.33 draws of 75 units.

Calculated from units 75; units per mL 100. Formula: 75 / 100 = 0.75 mL; 100 / 75 = 1.33

More on Tirzepatide

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3ZEPBOUND prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.