Skip to content
Peptigraph home

70 Units of Tirzepatide Is How Many mg?

It depends on the concentration. Here is what 70 units on a U-100 syringe holds at every common Tirzepatide mix, with the math.

Medically reviewed by Juan Pablo Frías, MD · · DisclosureGLP-1 / GIP dual agonistUpdated
70 units
0.70 mL
U-100 syringe
At 5 mg/mL
3.5 mg
10 mg vial + 2 mL
At 10 mg/mL
7 mg
20 mg vial + 2 mL

The short answer

70 units on a U-100 insulin syringe is 0.70 mL. How many mg that holds depends on how concentrated the solution is: mg = mL × mg per mL. For example, 70 units of a 5 mg/mL solution is 3.5 mg.

70 units at each concentration

Concentrations you get from the vial sizes Tirzepatide is sold in, mixed with 1 to 3 mL of bacteriostatic water.

70 units of Tirzepatide in mg by concentration
ConcentrationExample mixmg in 70 units
1.667 mg/mL5 mg + 3 mL1.167 mg
2 mg/mL5 mg + 2.5 mL1.4 mg
2.5 mg/mL5 mg + 2 mL1.75 mg
3.333 mg/mL10 mg + 3 mL2.333 mg
4 mg/mL10 mg + 2.5 mL2.8 mg
5 mg/mL5 mg + 1 mL · 10 mg + 2 mL3.5 mg
6 mg/mL15 mg + 2.5 mL4.2 mg
6.667 mg/mL20 mg + 3 mL4.667 mg
7.5 mg/mL15 mg + 2 mL5.25 mg
8 mg/mL20 mg + 2.5 mL5.6 mg
10 mg/mL10 mg + 1 mL · 20 mg + 2 mL7 mg
12 mg/mL30 mg + 2.5 mL8.4 mg
13.333 mg/mL40 mg + 3 mL9.333 mg
15 mg/mL15 mg + 1 mL · 30 mg + 2 mL10.5 mg
16 mg/mL40 mg + 2.5 mL11.2 mg
16.667 mg/mL50 mg + 3 mL11.667 mg
20 mg/mL20 mg + 1 mL · 40 mg + 2 mL14 mg
24 mg/mL60 mg + 2.5 mL16.8 mg
25 mg/mL50 mg + 2 mL17.5 mg
30 mg/mL30 mg + 1 mL · 60 mg + 2 mL21 mg
40 mg/mL40 mg + 1 mL · 120 mg + 3 mL28 mg
Branded pens deliver preset doses and are not measured in syringe units. This math applies to solutions drawn from a vial with an insulin syringe.

How to work it out

1. Concentration = vial mg ÷ mL of water added (a 10 mg vial + 2 mL = 5 mg/mL). 2. Volume = units ÷ 100 (70 units = 0.70 mL). 3. mg = volume × concentration.

Work it out for your vial

70 units converted to mg

70 units is 0.7 mL on a U-100 syringe. By strength: 2.5 mg/mL gives 1.75 mg; 5 mg/mL gives 3.5 mg; 10 mg/mL gives 7 mg; 15 mg/mL gives 10.5 mg; 20 mg/mL gives 14 mg.

Calculated from units 70; units per mL 100; concentrations mg per mL 2.5, 5, 10, 15, 20. Formula: mL = 70 / 100; mg = 70 x (mg/mL) / 100

No sampled tirzepatide concentration puts 70 units on a labelled amount. Concentration required for a labelled amount at 70 units: 2.5 mg needs 3.57 mg/mL, 5 mg needs 7.14 mg/mL, 7.5 mg needs 10.71 mg/mL, 10 mg needs 14.29 mg/mL, 12.5 mg needs 17.86 mg/mL, 15 mg needs 21.43 mg/mL.

Calculated from units 70; labelled amounts mg 2.5, 5, 7.5, 10, 12.5, 15; concentrations mg per mL 2.5, 5, 10, 15, 20. Formula: required mg/mL = labelled mg / units x 100

70 units against the label

At 2.5 mg the Zepbound label is describing a starting step rather than a maintenance dosage.[3]

The labelled multi-dose vials are drawn at 0.6 mL (60 units); 70 units is 117% of that draw, which at 4.17, 8.33, 12.5, 16.7, 20.8 and 25 mg/mL is 2.92, 5.83, 8.75, 11.69, 14.56, 17.5 mg.

Calculated from units 70; label conc mg per mL 4.17, 8.33, 12.5, 16.7, 20.8, 25; label draw mL 0.6. Formula: mg = 70 x (mg/mL) / 100 for each labelled concentration

No sampled concentration takes 70 units above the 15 mg label maximum; the highest is 14 mg.

Calculated from units 70; label max mg 15. Formula: max(mg) = 70 x 20 / 100

Other unit amounts

Common questions

70 units of tirzepatide is how many mg?

The answer depends on the vial and the water: 70 units is 7 mg from 10 mg in 1 mL; 3.5 mg from 10 mg in 2 mL; 2.333 mg from 10 mg in 3 mL; 7 mg from 30 mg in 3 mL.

Calculated from units 70; mixes vial mg 10, water mL 1; vial mg 10, water mL 2; vial mg 10, water mL 3; vial mg 30, water mL 3. Formula: mg = 70 x (vialMg / waterMl) / 100

How many mL is 70 units?

0.70 mL. A U-100 insulin syringe holds 100 units per mL, so units ÷ 100 = mL.

Is 70 units of Tirzepatide a normal dose?

Units measure volume, not dose. The same number of units holds a different amount of drug at each concentration, which is why this page does not judge doses.

70 units tirzepatide: how much liquid is that?

70 units is 0.7 mL, because U-100 syringes are marked at 100 units per mL; a 1 mL syringe therefore holds 1.43 draws of 70 units.

Calculated from units 70; units per mL 100. Formula: 70 / 100 = 0.7 mL; 100 / 70 = 1.43

More on Tirzepatide

Sources

  1. 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
  2. 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
  3. 3ZEPBOUND prescribing information (FDA label)FDA label, DailyMed · current labeldailymed.nlm.nih.govAccessed 2 Oct 2026

Found an error? Report a correction.