BPC-157 10 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 10 mg vial of BPC-157, the concentration you get, and a full dose-to-units chart.
- Vial size
- 10 mg
- With 2 mL water
- 5 mg/mL
- common choice
- 10 units contain
- 500 mcg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of BPC-157 in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 100 mcg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 10 mg/mL | 1000 mcg | 1 u | 100 u |
| 2 mL | 5 mg/mL | 500 mcg | 2 u | 200 u |
| 2.5 mL | 4 mg/mL | 400 mcg | 2.5 u | 250 u |
| 3 mL | 3.333 mg/mL | 333.3 mcg | 3 u | 300 u |
Calculator and full dosing table
Preset to the 10 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 5 mg/mL
- Doses per vial
- 33
- Weeks (1 dose/wk)
- 33
6 units (0.06 mL) on a 1 mL U-100 syringe: 300 mcg from a 10 mg vial + 2 mL water (BPC-157).
Dosing table for a 10 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 100 mcg | 1 | 2 | 2.5 | 3 |
| 200 mcg | 2 | 4 | 5 | 6 |
| 250 mcg | 2.5 | 5 | 6.25 | 7.5 |
| 300 mcg | 3 | 6 | 7.5 | 9 |
| 400 mcg | 4 | 8 | 10 | 12 |
| 500 mcg | 5 | 10 | 12.5 | 15 |
| 750 mcg | 7.5 | 15 | 18.75 | 22.5 |
| 1000 mcg | 10 | 20 | 25 | 30 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
300 mcg = 0.3 mg; 0.3 mg ÷ 5 mg/mL = 0.06 mL
0.06 mL × 100 = 6 units
The fixed human amounts to set a 10 mg BPC-157 vial against
On day 1 of that pilot the 10 mg went into 250 cc of normal saline, not into a syringe.[3]
The bladder pilot's amount was a total of 10 mg of BPC-157, given in a single procedure.[4]
How a 10 mg vial divides against the studied 10 mg and 20 mg amounts
For the 10 mg vial: arithmetic on amounts from a small intravenous pilot and a bladder-wall procedure, not syringe doses or a recommendation. Dose table for a 10 mg BPC-157 vial; water 1 / 2 / 3 mL gives 10 / 5 / 3.33 mg/mL. Row format for the 10 mg BPC-157 vial: dose, doses per vial, units at 1 / 2 / 3 mL. 10 mg: 1 administration, no remainder; 100 / 200‡ / 300‡ units. 20 mg: the vial holds 0.5 of one dose. († marks a 10 mg BPC-157 reading under 5 units, hard to measure accurately; ‡ marks one over the 100 units a 1 mL U-100 syringe holds.)
Calculated from vial mg 10; water mL 1, 2, 3; units per mL 100; doses mg 10, 20; rows dose mg 10, doses 1, remainder mg 0, units 100, 200, 300. Formula: doses = floor(vialMg / doseMg); units = doseMg x waterMl / vialMg x 100
In vial terms, a 10 mg administration takes 1 of a 10 mg vial and a 20 mg administration takes 0.5; vials needed are 1 and 2.
Calculated from vial mg 10; doses mg 10, 20. Formula: 10 / dose; dose / 10
Does any FDA-labelled product come in 10 mg?
The Drugs@FDA lookup by active ingredient BPC-157 returned no matches, so this vial size matches no labelled product.[5]
Common questions
How much water goes in a 10 mg vial of BPC-157?
That choice only changes the concentration. With 2 mL, a 10 mg vial is 5 mg/mL; with 1 mL it is 10 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 100 mcg from a 10 mg vial?
With 2 mL of water, 100 mcg is 2 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 10 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How much water for 10 mg BPC-157?
For this 10 mg BPC-157 vial, 1 mL gives 10 mg/mL, 2 mL gives 5 and 3 mL gives 3.33; one U-100 unit then holds 0.1, 0.05 or 0.033 mg.
Calculated from vial mg 10; water mL 1, 2, 3; units per mL 100. Formula: mg/mL = 10 / mL; mg per unit = (mg/mL) / 100
What dose do human BPC-157 studies report for a 10 mg vial?
The human intravenous report covers 2 healthy adults and infusions of up to 20 mg, with no adverse effects reported.[3]
More on BPC-157
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Safety of Intravenous Infusion of BPC157 in Humans: A Pilot Study.Alternative therapies in health and medicine · 2025PMID 40131143Accessed 2 Oct 2026
- 4Effect of BPC-157 on Symptoms in Patients with Interstitial Cystitis: A Pilot Study.Alternative therapies in health and medicine · 2024PMID 39325560Accessed 2 Oct 2026
- 5Drugs@FDA (openFDA) search: active ingredient "BPC-157"U.S. Food and Drug Administration · 2026api.fda.govAccessed 2 Oct 2026
Found an error? Report a correction.