BPC-157 5 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 5 mg vial of BPC-157, the concentration you get, and a full dose-to-units chart.
- Vial size
- 5 mg
- With 2 mL water
- 2.5 mg/mL
- common choice
- 10 units contain
- 250 mcg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of BPC-157 in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 100 mcg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 5 mg/mL | 500 mcg | 2 u | 100 u |
| 2 mL | 2.5 mg/mL | 250 mcg | 4 u | 200 u |
| 2.5 mL | 2 mg/mL | 200 mcg | 5 u | 250 u |
| 3 mL | 1.667 mg/mL | 166.7 mcg | 6 u | 300 u |
Calculator and full dosing table
Preset to the 5 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 2.5 mg/mL
- Doses per vial
- 16
- Weeks (1 dose/wk)
- 16
12 units (0.12 mL) on a 1 mL U-100 syringe: 300 mcg from a 5 mg vial + 2 mL water (BPC-157).
Dosing table for a 5 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 100 mcg | 2 | 4 | 5 | 6 |
| 200 mcg | 4 | 8 | 10 | 12 |
| 250 mcg | 5 | 10 | 12.5 | 15 |
| 300 mcg | 6 | 12 | 15 | 18 |
| 400 mcg | 8 | 16 | 20 | 24 |
| 500 mcg | 10 | 20 | 25 | 30 |
| 750 mcg | 15 | 30 | 37.5 | 45 |
| 1000 mcg | 20 | 40 | 50 | 60 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
300 mcg = 0.3 mg; 0.3 mg ÷ 2.5 mg/mL = 0.12 mL
0.12 mL × 100 = 12 units
The fixed human amounts to set a 5 mg BPC-157 vial against
A human pilot injected BPC-157 (total of 10 mg) around the area of bladder inflammation during a single procedure.[3]
An intravenous safety pilot infused 10 mg of BPC-157 in 250 cc of normal saline on day 1.[4]
How a 5 mg vial divides against the studied 10 mg and 20 mg amounts
For the 5 mg vial: arithmetic on amounts from a small intravenous pilot and a bladder-wall procedure, not syringe doses or a recommendation. 5 mg BPC-157 vial at 1 / 2 / 3 mL of water (5 / 2.5 / 1.67 mg/mL), per sourced dose, with doses per vial and units at 1 / 2 / 3 mL: 10 mg: the vial holds 0.5 of one dose. 20 mg: the vial holds 0.25 of one dose. († marks a 5 mg BPC-157 reading under 5 units, hard to measure accurately; ‡ marks one over the 100 units a 1 mL U-100 syringe holds.)
Calculated from vial mg 5; water mL 1, 2, 3; units per mL 100; doses mg 10, 20. Formula: doses = floor(vialMg / doseMg); units = doseMg x waterMl / vialMg x 100
In vial terms, a 10 mg administration takes 0.5 of a 5 mg vial and a 20 mg administration takes 0.25; vials needed are 2 and 4.
Calculated from vial mg 5; doses mg 10, 20. Formula: 5 / dose; dose / 5
FDA's compounding view of BPC-157
FDA's compounding page warns that drugs containing BPC-157 may pose risk for immunogenicity for certain routes of administration.[5]
Is there a labelled 5 mg strength of BPC-157?
The Drugs@FDA active-ingredient lookup for BPC-157 returned a not-found code, so no approved product exists at this strength or any other.[6]
Common questions
How much water goes in a 5 mg vial of BPC-157?
That choice only changes the concentration. With 2 mL, a 5 mg vial is 2.5 mg/mL; with 1 mL it is 5 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 100 mcg from a 5 mg vial?
With 2 mL of water, 100 mcg is 4 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 5 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How much bacteriostatic water for a 5 mg BPC-157 vial?
The water volume only sets the strength: 5 mg of BPC-157 in 1, 2 or 3 mL is 5, 2.5 or 1.67 mg/mL, which is 50, 25 or 17 mcg per syringe unit.
Calculated from vial mg 5; water mL 1, 2, 3; units per mL 100. Formula: mg/mL = 5 / mL; mg per unit = (mg/mL) / 100
What amounts did human studies of BPC-157 use, relative to a 5 mg vial?
The same intravenous pilot reported no adverse effects with infusions of up to 20 mg of BPC-157 in 2 healthy adults.[4]
More on BPC-157
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Effect of BPC-157 on Symptoms in Patients with Interstitial Cystitis: A Pilot Study.Alternative therapies in health and medicine · 2024PMID 39325560Accessed 2 Oct 2026
- 4Safety of Intravenous Infusion of BPC157 in Humans: A Pilot Study.Alternative therapies in health and medicine · 2025PMID 40131143Accessed 2 Oct 2026
- 5Official web pageOfficial web page · web page
- 6Drugs@FDA (openFDA) search: active ingredient "BPC-157"U.S. Food and Drug Administration · 2026api.fda.govAccessed 2 Oct 2026
Found an error? Report a correction.