BPC-157 20 mg Vial: Reconstitution and Dosing Chart
How much bacteriostatic water to add to a 20 mg vial of BPC-157, the concentration you get, and a full dose-to-units chart.
- Vial size
- 20 mg
- With 2 mL water
- 10 mg/mL
- common choice
- 10 units contain
- 1000 mcg
- at 2 mL, U-100
- Whole vial
- 200 units
- 2 mL on a U-100 scale
How much water to add
Bacteriostatic water only changes the concentration, not the amount of BPC-157 in the vial. More water means more units per dose (easier to read), less water means fewer.
| Water added | Concentration | 10 units contain | 100 mcg is | Whole vial |
|---|---|---|---|---|
| 1 mL | 20 mg/mL | 2000 mcg | 0.5 u | 100 u |
| 2 mL | 10 mg/mL | 1000 mcg | 1 u | 200 u |
| 2.5 mL | 8 mg/mL | 800 mcg | 1.3 u | 250 u |
| 3 mL | 6.667 mg/mL | 666.7 mcg | 1.5 u | 300 u |
Calculator and full dosing table
Preset to the 20 mg vial. Change any value; the table below the result updates with it.
- Concentration
- 10 mg/mL
- Doses per vial
- 66
- Weeks (1 dose/wk)
- 66
3 units (0.03 mL) on a 1 mL U-100 syringe: 300 mcg from a 20 mg vial + 2 mL water (BPC-157).
Dosing table for a 20 mg vial
Syringe units (U-100) for each dose, by how much bacteriostatic water you add.
| Dose | 1 mL water | 2 mL water | 2.5 mL water | 3 mL water |
|---|---|---|---|---|
| 100 mcg | 0.5 | 1 | 1.25 | 1.5 |
| 200 mcg | 1 | 2 | 2.5 | 3 |
| 250 mcg | 1.25 | 2.5 | 3.13 | 3.75 |
| 300 mcg | 1.5 | 3 | 3.75 | 4.5 |
| 400 mcg | 2 | 4 | 5 | 6 |
| 500 mcg | 2.5 | 5 | 6.25 | 7.5 |
| 750 mcg | 3.75 | 7.5 | 9.38 | 11.25 |
| 1000 mcg | 5 | 10 | 12.5 | 15 |
How the math works
Concentration is the vial's milligrams divided by the water you add. Volume to draw is your dose divided by that concentration. On a U-100 syringe, 1 mL is 100 units, so units = mL × 100.
300 mcg = 0.3 mg; 0.3 mg ÷ 10 mg/mL = 0.03 mL
0.03 mL × 100 = 3 units
The fixed human amounts to set a 20 mg BPC-157 vial against
The safety conclusion stops at 20 mg, so larger amounts of BPC-157 are outside what that pilot tested.[3]
The 10 mg in the bladder pilot was a total across the injections, not a per-injection amount.[4]
How a 20 mg vial divides against the studied 10 mg and 20 mg amounts
For the 20 mg vial: arithmetic on amounts from a small intravenous pilot and a bladder-wall procedure, not syringe doses or a recommendation. 20 mg of BPC-157 mixed with 1, 2 or 3 mL (20, 10, 6.67 mg/mL): 10 mg: 2 administrations, no remainder; 50 / 100 / 150‡ units. 20 mg: 1 administration, no remainder; 100 / 200‡ / 300‡ units. († marks a 20 mg BPC-157 reading under 5 units, hard to measure accurately; ‡ marks one over the 100 units a 1 mL U-100 syringe holds.)
Calculated from vial mg 20; water mL 1, 2, 3; units per mL 100; doses mg 10, 20; rows dose mg 10, doses 2, remainder mg 0, units 50, 100, 150; dose mg 20, doses 1, remainder mg 0, units 100, 200, 300. Formula: doses = floor(vialMg / doseMg); units = doseMg x waterMl / vialMg x 100
One 20 mg vial covers two 10 mg administrations or one 20 mg administration, which is 0.5 and 1 vial per administration.
Calculated from vial mg 20; doses mg 10, 20. Formula: 20 / dose; dose / 20
Is a 20 mg vial of BPC-157 a labelled strength?
The Drugs@FDA response for BPC-157 reads no matches, so this size is not a strength on any approved label.[5]
Common questions
How much water goes in a 20 mg vial of BPC-157?
That choice only changes the concentration. With 2 mL, a 20 mg vial is 10 mg/mL; with 1 mL it is 20 mg/mL. Less water means fewer units per dose and harder-to-read marks for small doses.
How many units is 100 mcg from a 20 mg vial?
With 2 mL of water, 100 mcg is 1 units on a U-100 syringe. With other water amounts, see the table.
How many doses are in a 20 mg vial?
Divide the vial size by the dose (in the same unit). The calculator on this page shows the number of whole doses for any dose you pick.
How many mL of water for a 20 mg BPC-157 vial?
Diluting 20 mg of BPC-157 in 1, 2 or 3 mL yields 20, 10 or 6.67 mg/mL, so a single unit (0.01 mL) carries 0.2, 0.1 or 0.067 mg.
Calculated from vial mg 20; water mL 1, 2, 3; units per mL 100. Formula: mg/mL = 20 / mL; mg per unit = (mg/mL) / 100
Is 20 mg an amount that has been studied for BPC-157?
In one pilot, up to 20 mg of BPC-157 was infused intravenously in 2 healthy adults with no adverse effects reported; that is a two-person intravenous study, not an injection protocol.[3]
More on BPC-157
Sources
- 1Metric (SI) Prefixes (NIST Reference on Constants, Units, and Uncertainty)National Institute of Standards and Technology (NIST) · 2025physics.nist.govAccessed 2 Oct 2026
- 2BASAGLAR (insulin glargine) injection, prescribing information (DailyMed)U.S. Food and Drug Administration / DailyMed (Eli Lilly and Company label) · 2026dailymed.nlm.nih.govAccessed 2 Oct 2026
- 3Safety of Intravenous Infusion of BPC157 in Humans: A Pilot Study.Alternative therapies in health and medicine · 2025PMID 40131143Accessed 2 Oct 2026
- 4Effect of BPC-157 on Symptoms in Patients with Interstitial Cystitis: A Pilot Study.Alternative therapies in health and medicine · 2024PMID 39325560Accessed 2 Oct 2026
- 5Drugs@FDA (openFDA) search: active ingredient "BPC-157"U.S. Food and Drug Administration · 2026api.fda.govAccessed 2 Oct 2026
Found an error? Report a correction.